1/2" Hydraulic Hose Kit - Digga

Digga 1/2" Hydraulic Hose Kit for Standard-Flow Auger Drives

Keep hydraulic connections matched to the attachment with this genuine Digga 1/2-inch Hydraulic Hose Kit. Designed for standard-flow Digga auger drives in the 1DSS through 4DSS range, the kit pairs a 1/2-inch bore with flush-face quick disconnects for connection to compatible equipment. It is a replacement hose option for skid steer and excavator attachment service where the existing hose assembly needs to be renewed.

Fit and Application

This kit is intended for the Digga 1DSS, 2DSS, 3DSS and 4DSS standard-flow auger drive range. Confirm the drive model and the hose length required for the specific machine-and-attachment arrangement before ordering. The product information identifies an overall-length selection, so the correct option depends on routing distance and connection position rather than bore size alone.

• Brand: Genuine Digga
• Hose bore: 1/2 inch
• Application: Standard-flow auger drives, 1DSS through 4DSS
• Connections: Flush-face quick disconnects
• Length: Select the required overall length
• SKU: HS-002485

Hydraulic Connections

Flush-face quick disconnects provide the connection interface specified for this kit. Their flat mating faces are designed to limit exposed fluid and debris at the coupling surfaces during normal connection and disconnection. Keep the coupler faces clean, inspect them for damage, and verify that the machine-side fittings match before installation. The listing does not specify fitting thread, pressure rating, flow rating, or a machine-specific adapter, so those details should be checked against the existing setup when relevant.

Choosing the Overall Length

Correct hose length helps accommodate the working route between the carrier and auger drive without leaving excessive slack or placing the hose under tension. Compare the required path with the existing assembly, allowing for the attachment’s operating movement and the location of hydraulic outlets. Avoid relying on a general machine model alone: carrier configuration, coupler position and hose routing can affect the length needed. Select the listed overall-length option that matches the application.

Replacement and Inspection

Before replacing a hose, shut down the machine and relieve hydraulic pressure according to the carrier and attachment procedures. Remove the old assembly carefully, noting its routing and connection orientation. Inspect mating fittings and couplers for contamination, wear or damage, and do not force mismatched connectors together. After installation, check the hose path through the attachment’s working range and confirm that it does not rub against sharp edges or become pinched.

For Attachment Maintenance

A serviceable hydraulic hose assembly supports the oil supply needed for an auger drive to operate. Worn, leaking or damaged hoses can interrupt work and require attention before the attachment returns to service. This Digga hose kit provides a defined replacement option for compatible standard-flow models, while its 1/2-inch bore and flush-face couplers help identify the relevant connection specification during parts selection.

Compatibility Checks

Confirm the auger drive is within the 1DSS–4DSS standard-flow range and verify that the hose bore, couplers and chosen length match the components being replaced. Do not assume compatibility with high-flow drives, other Digga series, or attachments from different manufacturers; those applications are not established by the product information. Where the machine uses different fittings or an altered hydraulic arrangement, compare specifications before installation.

Parts Ordering

Listed as a Digga auger part and skid steer attachment accessory, the kit is relevant to equipment owners, operators and service teams maintaining compatible auger drives. The product is offered by eSkidSteer, a specialist online dealer of attachments, parts and accessories for heavy equipment. Check the required overall length and connection details when selecting the hose kit so the replacement suits the existing configuration.

Product Summary

The 1/2" Hydraulic Hose Kit - Digga (HS-002485) is a genuine Digga hose kit for standard-flow 1DSS through 4DSS auger drives. It includes flush-face quick disconnects and is offered with an overall-length selection. Verify model, fitting compatibility and routing length before installation; the listed price is $298.99.