1MDS Auger Drive - Digga

Compact auger power for mini loader work

When a digging job calls for a clean, controlled hole in a confined work area, the Digga 1MDS Auger Drive provides a compact drive option for compatible mini loaders. Designed for machines in the 0.85 to 1 tonne class, it delivers up to 2,099 ft-lbs of torque at 3,000 PSI. This mini skid steer auger drive is intended for operators who need to match attachment performance to a smaller carrier rather than step up to a drive sized for larger equipment.

Drive specifications at a glance

• Product: Digga 1MDS Auger Drive
• SKU: 1MDS2-3
• Intended machine class: 0.85–1 tonne mini loader
• Maximum stated torque: 2,099 ft-lbs at 3,000 PSI
• Hydraulic flow range: 6–16 GPM
• Warranty information provided: 5-year gearbox warranty and 3-year motor warranty

These figures give you a starting point for checking whether the drive suits your carrier and work requirements. The available information describes the 1MDS as a compact gearbox design; it does not specify the mounting interface, included hoses or couplers, compatible auger bits, or machine models. Verify those details for your setup before purchase.

Match the drive to your carrier

Hydraulic compatibility is central to selecting an auger drive. The stated operating range is 6–16 GPM, with the torque figure specified at 3,000 PSI. Check your mini loader’s hydraulic flow and pressure ratings against these values, and confirm that its system can supply the requirements without exceeding the carrier or attachment limits. If the machine’s specifications are unclear, consult its manual or equipment dealer before choosing an auger drive.

Machine weight class is another selection point. Digga identifies the 1MDS for 0.85 to 1 tonne machines. That guidance does not confirm fit for every mini skid steer or mini loader in that range. Carrier mounting plates, hydraulic connections, auxiliary circuit configuration and manufacturer recommendations can differ. Confirm the exact attachment interface and connection requirements for your machine; do not rely on weight class alone to establish compatibility.

For controlled digging in compact work areas

A mini loader can reach locations where larger equipment is difficult to position, including landscaped sites, narrow access routes and smaller job areas. Pairing a compatible carrier with an appropriately sized auger drive allows the operator to use hydraulic power for hole drilling while keeping the overall attachment package suited to compact equipment. The drive is the power unit, not the digging bit itself, so select an auger bit separately unless the seller confirms a particular bit is included.

Auger results depend on more than drive torque. Soil conditions, bit diameter and design, required hole depth, machine hydraulic output and operator technique all affect digging. Use a bit suited to the material and job, and follow the carrier and attachment manufacturers’ operating instructions. The available product details do not state a maximum bit diameter, drilling depth, cycle time or soil-specific capacity, so those performance figures should not be assumed.

Gearbox and motor warranty coverage

The provided product information lists a 5-year gearbox warranty and a 3-year motor warranty. These terms can help distinguish the coverage stated for the drive’s main components. Warranty eligibility, exclusions, registration requirements and the process for making a claim are not detailed here; review the applicable Digga warranty documentation before relying on coverage for a particular application.

For buyers comparing mini skid steer augers, it is useful to separate published specifications from items that still require confirmation. The 1MDS’s machine class, flow range, torque and stated gearbox and motor warranty periods are listed above. Mounting details, hydraulic fittings, included accessories, weight, dimensions and any application-specific limits are not provided in the available description.

Selection checklist

• Confirm your machine falls within the stated 0.85–1 tonne class and is approved for the attachment.
• Check auxiliary hydraulic flow against the 6–16 GPM range.
• Confirm the carrier’s pressure rating and suitability for operation at the stated 3,000 PSI torque specification.
• Verify the mounting plate, hydraulic connections and any required adapters.
• Choose an auger bit for the required hole diameter, depth and ground conditions, and confirm whether it is sold separately.
• Review current warranty documentation for coverage details and conditions.

Product details and ordering

This listing is for the Digga 1MDS Auger Drive, SKU 1MDS2-3, categorized as a mini skid steer auger attachment. The displayed price is $2,626.99. Product availability and final order details should be checked on the listing before purchase. eSkidSteer.com serves equipment owners and operators shopping for attachments across machine categories; for a fit decision, provide your carrier make and model along with its hydraulic flow, pressure and mounting information.

Choose the 1MDS when its compact mini-loader application and published hydraulic specifications align with your machine and digging requirements. Confirming the interface and accessory details in advance helps ensure the auger drive is configured for the carrier rather than relying on a general machine category alone.