2DSS Skid Steer Auger Package with Mount - Digga

Overview

The 2DSS is Digga's planetary skid steer auger attachment for skid steers and compact track loaders of 2,200 - 5,500 lbs: 2,254 ft-lbs at 3,000 PSI, 10-26 GPM, a 2 inch hex shaft, and a universal quick attach frame package with 87 inch hoses and flush-face disconnects. Drive Only comes first for anyone replacing a drive on a frame they already own.

Key Features of the Digga 2DSS Skid Steer Auger Package

• Torque 2,254 ft-lbs at 3,000 PSI, 2,625 ft-lbs at 3,500 PSI
• Recommended flow 10-26 GPM, with 10 GPM the floor for rated torque
• Max speed 106 RPM — the figure that decides how fast a small-diameter hole goes down
• 2 inch hex output shaft taking A4 earth auger bits, AB4 bolt-on auger bits and RC4 rock and earth combo bits; a 2-9/16 inch round shaft is available as an option
• Drills to 30 inches in earth and 24 inches in clay or shale, subject to ground conditions
• The gearbox goes down the hole, so drilling depth is not lost to drive height
• 2-piece shaft design carries side load without putting it through the bearings
• Pressure relief valve optional — integrated into the motor rather than a bulky external valve block
• HALO Alignment Kit optional on every configuration
• 5 year gearbox and 3 year motor warranty for drilling use, plus lifetime shaft pull-out cover

Digga 2DSS Specifications

Choosing How the 2DSS Mounts

A drive working well below the machine needs more hose than the 87 inch set, and Digga's TPE hose kits come in 14 ft and 16 ft for that. Tell us if the package is for TPE work and we will confirm hose length with the order.

HALO Alignment Kit

Every 2DSS option on this page can be taken with No HALO or with the HALO Alignment Kit. The kit is not a bolt-on: the drive arrives with HALO built into its hood, with the extension cable and in-cab 12V plug. A ring of green lights means plumb and red guides the operator back — which is what replaces the second person standing at the hole calling the auger plumb. Retrofitting an older drive is a separate HALO Retrofit Kit.

Where the 2DSS Sits in Digga's Range

Against the 1DSS, the 2DSS adds 55 percent more turning force and lifts the clay and shale ceiling from 12 to 24 inches, from a flow range of 6-16 to 10-26 GPM. The 3DSS above it is another 26 percent up, on the same 30 inch earth ceiling. Max speed is 106 RPM. Speed and torque trade against each other, so the smaller drives in this range spin faster and the larger ones pull harder.

What Comes in the 2DSS Package

• Digga 2DSS auger drive
• Universal skid steer frame and 75mm linkage (HI-000128K), or the TPE extension frame, unless you choose Drive Only
• 87 inch hoses with flush-face quick disconnects on the frame package
• HALO where the HALO Alignment Kit is selected
• Not included: auger bits, and extensions if you need to drill deeper than the bit reaches

Which Loaders Fit the 2DSS?

The 2DSS package mounts on the universal skid steer quick attach plate, so brand does not decide fitment — flow does. It runs on a standard auxiliary circuit from 10 GPM, so it suits ordinary standard-flow loaders.

Digga 2DSS Skid Steer Package Questions, Answered