6DDS High Flow Skid Steer Auger Package with Mount - Digga

Overview

A 6DDS high flow skid steer auger attachment gives 4,911 ft-lbs at 3,000 PSI and lifts the clay and shale limit to 30 inches, a quarter more torque than the 5DDS for around forty dollars more at list. On this page it comes three ways: Drive Only if you already have a frame, on the Universal Quick Attach Frame Package with 7 ft hoses and flush-face disconnects, or on the Extension Frame (TPE) Package, Digga's telescopic piling and drilling extension.

Key Features of the Digga 6DDS Skid Steer Auger Package

• Torque 4,911 ft-lbs at 3,000 PSI and 5,717 ft-lbs at 3,500 PSI, as published by Digga for the 6DDS
• Recommended flow 12-36 GPM, with 12 GPM the floor for rated torque
• 2.5 inch hex output shaft taking A6 earth auger bits, RC6 rock and earth combo bits and DR6 dedicated rock augers
• Drills to 40 inches in earth and 30 inches in clay or shale, subject to ground conditions
• Digga gearbox with an integrated pressure relief valve, so no external valve block and fewer joints to leak
• The gearbox follows the bit down the hole, so drive height is not lost from drilling depth
• HALO Alignment Kit optional — HALO built into the drive hood at the factory, reading plumb to ±0.25 degrees per Digga
• 2-piece shaft design carries side load without putting it through the bearings
• 5 year gearbox and 3 year motor warranty for drilling use, plus lifetime shaft pull-out cover

Digga 6DDS Specifications

Figures as published by Digga for the 6DDS. Maximum drilling diameter depends on ground conditions and is a guide rather than a rating.

Choosing How the 6DDS Mounts

The TPE is engineered for drives up to 16,000 ft-lbs, so the 6DDS sits well inside it. One thing to plan for: a drive working 12-14 ft down needs more hose than the 7 ft set, and Digga's TPE hose kits come in 14 ft and 16 ft for exactly that. Tell us if the package is for TPE work and we will confirm hose length with the order.

HALO Alignment Kit

Every 6DDS on this page — both frame options and Drive Only — can be taken with No HALO or with the HALO Alignment Kit. Despite the name it is not a bolt-on: choosing it supplies the 6DDS with HALO built into the drive hood at the factory, with the extension cable and in-cab 12V plug. A ring of green lights means plumb; red and green guide the operator back when the drive drifts. On a one-person crew it replaces the spotter at the hole.

What Comes in the 6DDS Skid Steer Package

• Digga 6DDS auger drive
• Universal skid steer frame and 75mm linkage, or the TPE extension frame, unless you choose Drive Only
• 7 ft hoses with flush-face quick disconnects on the frame package
• HALO where the HALO Alignment Kit is selected
• Not included: auger bits

Where the 6DDS Sits in Digga's High Flow Range

Against the 5DDS, the 6DDS adds 26 percent more turning force and lifts the clay and shale ceiling from 24 to 30 inches, while asking 12 GPM rather than 10. The 7DDS above it is another 26 percent up, reaching 48 inches in earth against 40. The 6DDT is the two-speed version of the same size at 5,013 ft-lbs, shifting between torque and speed while drilling and needing a case drain return. Max speed is 67 RPM, against 100 on the 6DDT.

Which Loaders Fit the 6DDS?

The 6DDS package mounts on the universal skid steer quick attach plate, so fitment is decided by hydraulics rather than brand. The 6DDS needs a high flow auxiliary circuit and at least 12 GPM to reach the torque above.

Add the 6DDS package to your cart to see delivered pricing for your address. Enter your machine make and model with the order and we check the fit before it ships.

Digga 6DDS Skid Steer Package Questions, Answered