External 2-Way Flow Valve Kit 80GPM Max - Digga

Digga External 2-Way Flow Valve Kit — 80 GPM Maximum

When a hydraulic attachment requires flow reversal, the Digga External 2-Way Flow Valve Kit provides a practical way to switch circuit direction on high-flow equipment. Rated for up to 80 GPM, this external valve kit is intended for applications where the machine’s hydraulic circuit needs a two-way flow-reversal function. Its high flow rating makes it a potential fit for larger excavator hammer circuits, subject to confirmation of the machine’s hydraulic specifications and the attachment’s requirements.

The valve is supplied for either a 12V or 24V electrical system. Confirm the machine’s system voltage before selecting the kit; voltage selection is an essential part of matching the electrical control to the carrier. The kit also includes a mounting bracket and fittings, providing key hardware for installation. Port sizes, connector style, wiring details, and any additional components required for a specific machine are not specified here and should be verified before installation.

Flow reversal for compatible circuits

A two-way flow reversal valve changes the direction of hydraulic flow through a compatible circuit. This function can support attachments that require reversed flow to operate as intended. The 80 GPM maximum rating describes the kit’s stated upper flow capacity; it does not establish that every machine or attachment can operate at that rate. Actual working flow must remain within the limits specified by the carrier, valve installation, hoses, and attachment.

Before choosing a valve, compare the machine’s available auxiliary or hammer-circuit flow and pressure with the attachment’s operating requirements. Flow and pressure are separate specifications: an 80 GPM rating alone does not confirm pressure compatibility. Check the equipment manual and attachment documentation, and confirm whether the existing circuit, controls, and hydraulic connections are appropriate for the installation.

Electrical and mounting considerations

This is an external valve kit, so mounting location and hose routing need to be planned around the machine and attachment. The included bracket provides a mounting component, while the included fittings help connect the valve within a compatible hydraulic arrangement. Confirm available mounting space, fitting compatibility, hose lengths, clearance through the machine’s full range of movement, and protection from impact or abrasion before installation.

Choose the 12V or 24V configuration to match the carrier’s electrical system. Installation should follow the equipment and valve instructions, with electrical connections protected and hydraulic lines routed securely. Relieve hydraulic pressure before working on the circuit, and have a qualified technician complete or inspect the installation when the machine’s wiring or hydraulic configuration is uncertain.

Fitment checks before ordering

• Maximum flow: Rated up to 80 GPM; verify actual machine flow and attachment requirements.
• Electrical voltage: Available for 12V or 24V systems; match the selected version to the carrier.
• Included hardware: Mounting bracket and fittings are included.
• Application: External two-way flow reversal for compatible hydraulic circuits, including suitable high-flow applications.
• Confirm before installation: Pressure rating, port and fitting specifications, wiring, controls, and any machine-specific adapters are not detailed in the supplied product information.

Compatibility should be based on the complete circuit, not on flow capacity alone. Compare the valve configuration with the carrier’s hydraulic diagram and the attachment’s flow direction requirements. If the machine uses a proprietary connector, unusual port arrangement, or dedicated control harness, confirm the required connections and accessories before beginning installation.

For excavator operators evaluating a hammer circuit, verify that the circuit supports the valve’s intended flow-reversal function and that the selected voltage matches the machine. The 80 GPM maximum is relevant to high-flow equipment, but it is not a recommendation to exceed the lowest rated component in the hydraulic system. Machine, valve, hose, and attachment limits govern safe operating specifications.

The Digga External 2-Way Flow Valve Kit is categorized as a skid steer accessory and electrical accessory, while its high-flow circuit application may also be relevant to compatible excavator equipment. It is a component for adapting hydraulic flow control, not a standalone attachment. Correct selection depends on electrical voltage, hydraulic flow, pressure, fittings, mounting, and the requirements of the implement being operated.

Supplied by eSkidSteer, a specialist online dealer of attachments, parts, and accessories for equipment including skid steers and excavators, this kit can be considered alongside other machine-specific components. Review the carrier and attachment specifications together, then select the 12V or 24V version that matches the machine. Price: $2,606.99; SKU HA-000958-12-3.