External 2-Way Flow Valve Kit 32GPM Max - Digga

Digga External 2-Way Flow Valve Kit, 32 GPM Max

Give a compatible excavator’s single-direction hammer circuit two-way flow with the Digga External 2-Way Flow Valve Kit. Rated for flow up to 32 GPM, this external valve kit is designed to reverse hydraulic flow for attachments that require it, providing a practical way to adapt the circuit without treating the machine as though it already has bidirectional auxiliary flow.

Excavators equipped with a one-way hammer circuit are the stated application. The valve provides the flow-reversal function needed to support two-way operation, while its external mounting arrangement keeps the kit separate from the attachment. Confirm that the excavator’s hydraulic circuit, attachment requirements and available space are appropriate before installation; the maximum flow rating alone does not establish compatibility with every machine or attachment.

Key specifications and included components

• Maximum flow: 32 GPM.
• Electrical options: 12V or 24V; choose the version that matches the machine’s electrical system.
• Installation components: Mounting bracket and fittings are included.
• Configuration: External two-way flow reversal valve kit for a compatible single-direction hammer circuit.

The 32 GPM figure is the stated maximum, not a guarantee that a particular excavator supplies that flow. Check the machine’s hydraulic output and the attachment manufacturer’s required flow and pressure specifications. The available product information does not state a pressure rating, hose dimensions, connector types or a machine-specific fit list, so those details should be verified for the intended installation before work begins.

Electrical selection and installation planning

Choose 12V or 24V according to the excavator’s electrical system. Matching voltage is essential when selecting an electrically operated valve kit; do not assume that either version will suit a machine without checking its electrical specifications. The included mounting bracket and fittings support installation, but exact mounting location, hose routing, wiring connections and any additional machine-specific hardware are not specified in the available product details.

Before installation, compare the kit’s connection and mounting requirements with the excavator and the intended attachment. Plan for secure bracket placement and hydraulic hose routing that avoids interference with moving parts and protects lines during operation. Installation should follow applicable machine and component instructions, with hydraulic pressure relieved before connecting or servicing hydraulic components. Have a qualified equipment technician confirm any unresolved circuit or wiring requirements.

Application and compatibility checks

This kit is intended for excavators with a single-direction hammer circuit that need two-way flow. It is not described as a universal valve for all excavators, skid steers or hydraulic attachments. Compatibility depends on more than the 32 GPM maximum: verify the carrier circuit, operating pressure, electrical voltage, fittings, available mounting space and the attachment’s flow direction requirements. Confirm that the attachment is designed for the resulting hydraulic configuration.

For construction, landscaping and agricultural equipment operators, correct circuit setup matters when pairing a carrier with hydraulic equipment. A flow reversal valve can address the one-way-to-two-way circuit requirement described for this kit, but it does not increase the excavator’s hydraulic capacity or establish that a particular attachment is suitable. Check manufacturer specifications for both the carrier and attachment when planning the pairing.

What is included—and what to confirm

The product information identifies the valve kit, mounting bracket and fittings, with a choice of 12V or 24V. It does not list a specific excavator make or model, pressure limit, detailed wiring diagram, hose set or installation labor. Confirm the exact contents and any additional items needed for the planned setup before scheduling installation. If the excavator’s circuit configuration or attachment requirements are uncertain, resolve those details before ordering or connecting the kit.

The Digga External 2-Way Flow Valve Kit is a specification-led option for a defined hydraulic conversion: adding two-way flow functionality to a compatible excavator’s single-direction hammer circuit, up to 32 GPM. Selecting the correct voltage and verifying hydraulic, electrical and physical fit are the key steps in determining whether this external valve kit suits the application.