About this product
Position the auger without repositioning the skid steer
When a hole needs to move a few inches to align with a post, footing, or planting layout, repositioning the entire loader can add unnecessary steps. The genuine Digga Skid Steer Slide Shift Auger Mounting Bracket allows the auger drive to shift sideways across the loader plate, helping place the bit over the target while the machine remains in position. This bracket is designed for skid steer auger applications where lateral adjustment is useful for accurate hole placement.
Lateral adjustment for practical jobsite alignment
With a conventional fixed mounting arrangement, correcting the auger’s position may require moving the carrier and resetting its approach. A slide shift bracket provides another adjustment point: the drive can travel across the loader plate to bring the auger into line. This is useful when working near fences, building lines, existing structures, or other points where the desired hole location is more important than the machine’s initial position.
The sideways movement is intended to support positioning, not to replace careful machine operation or site planning. Set the skid steer on suitable ground, lower and control the attachment as required, and verify the auger’s location before drilling. The bracket’s value is straightforward: it can help reduce repeated machine repositioning when small alignment corrections are needed during a series of holes.
Matched to the Digga drive
This product is a genuine Digga part and is described as matched to your drive. Matching the bracket to the auger drive is central to selecting the correct mounting component; the bracket should not be assumed to fit every Digga drive, loader plate, or third-party auger configuration. Confirm the drive model and attachment interface against the required setup before ordering. Where fitment is uncertain, provide the drive identification and machine or plate details for a compatibility check.
Compatibility depends on the complete connection between the skid steer loader plate, mounting bracket, and auger drive. A correct match supports secure attachment and the intended lateral-shift function. Do not rely on the general category name alone to establish fit, particularly when the drive, plate, or mounting system has been changed from its original configuration.
Use cases across drilling work
Skid steer augers are used in construction, landscaping, and agricultural work for tasks such as preparing post holes, planting holes, and other drilled openings. On these jobs, a slide shift bracket can assist with aligning the auger to a marked location without requiring the carrier to move for every small correction. It may be especially useful where a consistent line of holes is required and accurate spacing matters.
The bracket adjusts the position of the auger drive across the loader plate; it does not determine hole diameter or drilling depth. Those depend on the selected auger bit, drive, soil conditions, and operating setup. Choose the appropriate auger equipment for the material and dimensions required, and follow the drive and machine operating guidance for safe drilling.
Selection and fitment checks
Before selecting the Skid Steer Slide Shift Auger Mounting Bracket - Digga, check the following details:
- Auger drive: Identify the Digga drive the bracket is intended to match.
- Loader plate: Confirm the skid steer’s attachment plate and the bracket’s required interface.
- Existing hardware: Check whether the setup includes any adapter or mounting components that affect compatibility.
- Application: Verify that lateral positioning is needed for the planned drilling work.
- Condition and installation: Inspect the mounting surfaces and fasteners, and follow applicable manufacturer instructions during installation.
Product information provided here does not specify the bracket’s dimensions, travel range, weight, hydraulic requirements, or included hardware. These details should be confirmed for the exact product configuration rather than inferred. Likewise, the listed product price is not a substitute for confirming fitment to the drive and loader plate.
Installation and operation considerations
Install the bracket only on a compatible mounting arrangement and secure all connection points according to the relevant manufacturer instructions. Before operation, check that the bracket and drive are properly seated and that the attachment is retained by the loader plate. Keep the auger clear of personnel and obstacles while positioning, and use the skid steer and auger drive within their specified operating limits.
During drilling, make positioning adjustments in a controlled manner and ensure the auger is aligned before engaging it with the ground. The slide-shift feature assists with lateral placement; it does not eliminate the need to stabilize the machine, assess underground hazards, or observe safe operating procedures. Inspect the assembly periodically for looseness or damage, especially when used in demanding jobsite conditions.
Digga replacement and attachment component
As a genuine Digga mounting bracket, this component is intended for customers maintaining or configuring a compatible Digga skid steer auger setup. It is listed under skid steer augers, accessories, and attachment plates and adapter systems. Use the SKU FR-001247 when identifying this item, and compare the required drive and mounting details before purchase. Matching the bracket correctly helps preserve the intended connection between carrier, mount, and auger drive while adding a practical lateral-positioning option for drilling work.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
