About this product
The Serv-Ware SMGS-60 is the largest griddle in the SMGS manual series and is built for kitchens where the flat top never really gets a break. Five feet of cooking surface gives high-volume breakfast operations, buffets, hotel kitchens and busy burger counters the room to run several menu items at once without crowding.
Five steel U-shaped burners rated 30,000 BTU/hr each deliver 150,000 BTU/hr in total. There is one manual control for every 12" of width, and on this model the griddle plate is a full 1" thick steel.
What you will notice in day-to-day use
- A heavy plate for heavy use. The 1" thick steel plate stores a lot of heat, so the surface stays steady when you load it edge to edge.
- Five zones to work with. Separate controls every 12" let you set different temperatures across the plate, or shut sections down in slow periods.
- Plenty of power. 150,000 BTU/hr in total from U-shaped burners that spread the flame under each section.
- Quick start every shift. Standing pilots keep the burners ready to light, and chrome-coated zinc alloy knobs are easy to grip.
- Simple cleanup. A bottom oil collector and stainless steel front and sides keep closing time short.
Choosing your setup
Gas type: this griddle is offered for natural gas or LP; choose the gas your kitchen uses above. Burner ratings are the same on either gas, and a conversion kit for the other gas is included, so it can be switched later by a qualified installer.
Gas Input per burner Total input Supply pressure Natural gas 30,000 BTU/hr 150,000 BTU/hr 4" W.C. LP 30,000 BTU/hr 150,000 BTU/hr 10" W.C.Specifications
Brand Serv-Ware Model SMGS-60 Type Countertop gas griddle, manual controls Burners 5 x 30,000 BTU/hr steel U-shaped burners Total input 150,000 BTU/hr Controls 5 manual valves (one per 12"), standing pilot Griddle plate 1" thick steel Grease management Oil collector at the bottom Gas type Natural gas or LP (choose above); conversion kit for the other gas included Gas pressure 4" W.C. natural gas; 10" W.C. LP Gas line 3/4" Construction Stainless steel front and sides; chrome-coated zinc alloy knobs Legs Heavy-duty adjustable stainless steel Dimensions (W x D x H) 60" x 29-15/16" x 16" Shipping weight 560 lbBefore it arrives
- Gas: 3/4" gas line; have a qualified gas installer make the connection and handle any conversion to the other gas.
- Ventilation: install under a commercial hood following your local code.
- Counter or stand: plan for a sturdy, non-combustible surface at least 60" wide and about 30" deep, and use the adjustable legs to level it.
- Delivery: ships at about 560 lb, so arrange enough hands or a liftgate.
Warranty
One year parts and labor on the entire unit, counted from installation (up to 18 months from shipment), for commercial use in the United States, from Serv-Ware.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






