About this product
The MagiKitch'n MKG-60-ST is the griddle for kitchens that care about exact numbers. It pairs a 60-inch, 1" thick polished steel plate with solid state thermostats, so it suits operators who cook delicate items next to hard sears: brunch restaurants doing eggs and crepes, teppanyaki-style counters, hotel kitchens and busy diners.
Total input is 150,000 BTU/hr from ten stainless steel venturi burners spaced every 6 inches. Five solid state thermostats, one per 12-inch zone, hold anywhere from 150°F – 550°F, the widest range in the MKG line, and the matchless ignition lights the pilots as soon as the power is on. Cooking surface: 59-3/4" x 24".
What you will notice in day-to-day use
- Low and slow, or very hot. Starting at 150°F, the solid state controls can gently hold or warm product in one zone while another runs at 550°F.
- Tight, responsive control. Probes embedded in the plate feed the thermostats the real surface temperature, so they correct quickly after a heavy load.
- A thick plate that keeps its heat. The 1" polished plate stores plenty of energy and spreads it evenly from edge to edge.
- Easy start-up. Matchless ignition and recessed pilot-ready lights mean no matches or spark buttons at opening time, and safety pilots shut off on flame loss.
- Cleanup that does not drag on. A 3-1/2" front trough and welded chute feed a 3.75 gallon grease box with a splash-zone compartment; smooth stainless sides and no exposed fasteners wipe down fast.
Choosing your setup
Gas type: available for natural gas or liquid propane; choose the gas your kitchen uses above. Pressures for each gas:
Gas Supply pressure Burner (manifold) pressure Natural gas 7" – 14" W.C. 4" W.C. Liquid propane 12" – 14" W.C. 10" W.C.If you do not need the 150°F low end, the MKG-60-E with electric thermostats (200°F – 550°F) is the alternative, and 24", 36" and 48" widths are also offered.
Specifications
Brand MagiKitch'n Model MKG-60-ST Type Countertop gas griddle, solid state thermostat controls, matchless ignition Total input 150,000 BTU/hr Burners 10 x 15,000 BTU/hr stainless steel venturi burners, one every 6" Controls 5 solid state thermostats, one every 12", 150°F – 550°F; probes embedded in the plate Ignition Matchless 24VAC ignition, safety pilot with flame-loss shutoff (one pilot per two zones) Griddle plate 1" thick polished steel Cooking area 59-3/4" W x 24" D Grease management 3-1/2" front trough, fully welded chute, 3.75 gal grease box (left) with splash-zone compartment Construction Double-walled stainless steel sides, tapered back splash, solid-panel cabinet base, no exposed fasteners Legs 4", removable Gas connection 3/4"; regulator and shutoff factory installed Electrical (controls) 115V, 50/60 Hz, 1.10 A Dimensions (W x D x H) 60" x 31-9/16" x 23-9/32" Net weight 700 lb Shipping weight 750 lb (crate 75" x 45" x 40") Certifications CE, CSA Flame, CSA Star, NSF, Made in USABefore it arrives
- Gas and power: 3/4" gas inlet; a qualified installer should connect it and confirm supply pressure. The matchless ignition and thermostats also need a 115V outlet (1.10 A).
- Ventilation: install under a commercial hood and do not block the flue at the rear, per your local code.
- Clearance: keep 6" at the rear and 2" at the sides from combustible surfaces (0" sides next to non-combustible). If you mount it on a stand with casters, use a flexible gas hose with a restraint.
- Delivery: approx. 750 lb shipping weight on a 75" x 45" x 40" crate; any stand ships separately, so plan for a liftgate and a few hands.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

