About this product
For kitchens where consistency is everything, from a high-volume brunch service to a chain with tight cooking specs, the MagiKitch'n MKG-36-ST is the top of the MKG line. It combines a 1-inch thick polished steel plate with solid state thermostats that hold a wide temperature range and respond quickly to changing loads.
Six stainless steel venturi burners put a total of 90,000 BTU/hr under the 36-inch plate, and three solid state thermostats (one per 12-inch zone) cover 150°F to 550°F. That low end is useful for holding and gentle egg work, while the high end handles a hard sear. The cooking area is 35-3/4" wide by 24" deep.
What you will notice in day-to-day use
- The widest temperature range in the series. From 150°F to 550°F, one griddle can hold, toast, fry eggs and sear burgers at the same time.
- Fast, accurate response. Probes embedded in the plate tell the solid state controls exactly what the cooking surface is doing, for tighter holding and quicker recovery.
- Push the power, not the pilot. Matchless ignition lights the pilots automatically, and recessed pilot-ready lights, power switches and a heat-on light keep the front clean and easy to read.
- Heavy plate, heavy duty. A 1" thick polished steel plate and double-walled stainless sides stand up to all-day production.
- Cleanup that does not drag on. Spatula-wide 3-1/2" front trough, welded chute and a 3.75 gallon grease box, plus no exposed fasteners and a removable cabinet back.
Choosing your setup
Gas type: this griddle is offered for natural gas or liquid propane (LP); choose the gas your kitchen uses above. The gas regulator and shutoff come factory installed. Burner and supply pressures for each gas are below.
Gas Burner pressure Supply pressure Natural gas 4" W.C. 7" – 14" W.C. Liquid propane 10" W.C. 12" – 14" W.C.The same solid state griddle comes in 24" and 48" widths (MKG-24-ST, MKG-48-ST); electric thermostat and snap action versions are also offered.
Specifications
Brand MagiKitch'n Model MKG-36-ST Type Countertop gas griddle, solid state thermostat controls Total input 90,000 BTU/hr Burners 6 all-stainless independent venturi burners, 15,000 BTU/hr every 6" Controls 3 solid state thermostats (one every 12"), 150°F – 550°F Ignition Matchless ignition (pilot lights automatically when the power is turned on); safety pilot with flame loss shutoff (one pilot per up to two zones) Griddle plate 1" thick polished steel Cooking area 35-3/4" W x 24" D Grease management 3-1/2" spatula-wide front trough, fully welded chute, 3.75 gal grease box (left) with splash zone compartment Construction Double-walled stainless steel sides, tapered splash back, extra smooth 11 ga. skirting, solid-panel cabinet base, no exposed fasteners Legs 4", removable for flush mounting Gas connection 3/4" Electrical 115V, 50/60 Hz, 0.66 A (for matchless ignition and thermostats) Dimensions (W x D x H) 36" x 31-9/16" x 23-9/32" Net weight 470 lb Shipping weight 520 lb (approx.) Certifications CSA Flame, CSA Star, NSF, CE, Made in USABefore it arrives
- Gas: 3/4" gas connection; a qualified installer should size the supply line to hold burner pressure with every appliance on full.
- Power: the matchless ignition and thermostats need a 115V supply; draw is only 0.66 A.
- Ventilation: install under a commercial hood following local code, and do not block the flue or place hood drains over it.
- Clearance: keep 6" at the rear and 2" at the sides from combustible surfaces (0" sides next to non-combustible). If you mount it on a stand with casters, use a flexible gas hose with a restraint.
- Delivery: ships crated at about 520 lb (52" x 45" x 42"); stands ship separately.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

