About this product
Five feet of flat top is a serious production tool, and the MagiKitch'n MKG-60 is built for exactly that. With a 1-inch thick polished plate and five thermostat zones, it suits banquet and catering kitchens, large cafeterias, casinos and the busiest breakfast restaurants that need to cook a lot of food in one place.
Ten stainless steel venturi burners, 15,000 BTU/hr every 6 inches, add up to 150,000 BTU/hr. Five snap action thermostats, one every 12 inches, hold the plate between 200°F and 450°F across a 59-3/4" wide by 24" deep cooking surface.
What you will notice in day-to-day use
- Biggest surface in the series. Nearly 60" of usable steel means more pancakes, more patties and more grilled sandwiches per batch.
- Five zones to manage the load. Run each 12" section at its own temperature, or turn zones off in slow periods to cut gas use.
- Controls anyone can run. Snap action thermostats and a recessed piezo spark ignitor make it easy to light and set, and each pilot has a flame loss safety shutoff.
- Even heat, plenty of it. All-stainless independent venturi burners every 6" and a 1" thick plate keep heat steady from end to end.
- Grease management sized for the job. A spatula-wide 3-1/2" front trough and welded chute drain into a 3.75 gallon grease box with splash zone compartment.
Choosing your setup
Gas type: this griddle is offered for natural gas or liquid propane (LP); choose the gas your kitchen uses above. The gas regulator and shutoff come factory installed. Burner and supply pressures for each gas are below.
Gas Burner pressure Supply pressure Natural gas 4" W.C. 7" – 14" W.C. Liquid propane 10" W.C. 12" – 14" W.C.Need a smaller size? The MKG series also comes in 24", 36" and 48" widths, and those sizes are available with electric or solid state thermostats.
Specifications
Brand MagiKitch'n Model MKG-60 Type Countertop gas griddle, snap action thermostat controls Total input 150,000 BTU/hr Burners 10 all-stainless independent venturi burners, 15,000 BTU/hr every 6" Controls 5 snap action thermostats (one every 12"), 200°F – 450°F Ignition Piezo spark ignitor (push-button pilot lighting); safety pilot with flame loss shutoff (one pilot per up to two zones) Griddle plate 1" thick polished steel Cooking area 59-3/4" W x 24" D Grease management 3-1/2" spatula-wide front trough, fully welded chute, 3.75 gal grease box (left) with splash zone compartment Construction Double-walled stainless steel sides, tapered splash back, extra smooth 11 ga. skirting, solid-panel cabinet base, no exposed fasteners Legs 4", removable for flush mounting Gas connection 3/4" Dimensions (W x D x H) 60" x 31-9/16" x 23-9/32" Net weight 700 lb Shipping weight 750 lb (approx.) Certifications CSA Flame, CSA Star, NSF, CE, Made in USABefore it arrives
- Gas: 3/4" gas connection; a qualified installer should size the supply line to hold burner pressure with every appliance on full.
- Ventilation: install under a commercial hood following local code, and do not block the flue or place hood drains over it.
- Clearance: keep 6" at the rear and 2" at the sides from combustible surfaces (0" sides next to non-combustible). If you mount it on a stand with casters, use a flexible gas hose with a restraint.
- Delivery: ships crated at about 750 lb (75" x 45" x 40"); stands ship separately.
Warranty
2 years parts and labor from MagiKitch'n.
Specifications per MagiKitch'n data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

