About this product
Thirty-six inches is the size most independent restaurants end up choosing, and the Serv-Ware SMGS-36 shows why. It gives a diner, burger joint or brunch spot enough flat top to run pancakes, eggs and bacon side by side, yet it still sits on a standard countertop or equipment stand. Simple manual controls keep it easy for any cook to run and easy to service.
Three steel U-shaped burners rated 30,000 BTU/hr each deliver 90,000 BTU/hr in total, with one manual valve for every 12" of the 3/4" thick steel plate.
What you will notice in day-to-day use
- Three independent zones. Run a hot sear zone, a medium zone and a gentle zone for eggs or holding, all on one plate.
- Strong, even output. At 30,000 BTU/hr per burner, the U-shaped burners spread heat across each section and bring the plate back quickly after a heavy load.
- Built for steady use. Stainless steel front and sides, heavy-duty adjustable stainless legs and chrome-coated zinc alloy knobs hold up to a busy line.
- Instant ignition. Standing pilots keep every burner ready to light at the turn of a knob.
- Grease under control. An oil collector at the bottom gathers runoff so closing cleanup takes less time.
Choosing your setup
Gas type: this griddle is offered for natural gas or LP; choose the gas your kitchen uses above. Burner ratings are the same on either gas, and a conversion kit for the other gas is included, so it can be switched later by a qualified installer.
Gas Input per burner Total input Supply pressure Natural gas 30,000 BTU/hr 90,000 BTU/hr 4" W.C. LP 30,000 BTU/hr 90,000 BTU/hr 10" W.C.Specifications
Brand Serv-Ware Model SMGS-36 Type Countertop gas griddle, manual controls Burners 3 x 30,000 BTU/hr steel U-shaped burners Total input 90,000 BTU/hr Controls 3 manual valves (one per 12"), standing pilot Griddle plate 3/4" thick steel Grease management Oil collector at the bottom Gas type Natural gas or LP (choose above); conversion kit for the other gas included Gas pressure 4" W.C. natural gas; 10" W.C. LP Gas line 3/4" Construction Stainless steel front and sides; chrome-coated zinc alloy knobs Legs Heavy-duty adjustable stainless steel Dimensions (W x D x H) 36" x 29-15/16" x 16-1/4" Shipping weight 300 lbBefore it arrives
- Gas: 3/4" gas line; have a qualified gas installer make the connection and handle any conversion to the other gas.
- Ventilation: install under a commercial hood following your local code.
- Counter or stand: plan for a sturdy, non-combustible surface at least 36" wide and about 30" deep, and use the adjustable legs to level it.
- Delivery: ships at about 300 lb, so arrange enough hands or a liftgate.
Warranty
One year parts and labor on the entire unit, counted from installation (up to 18 months from shipment), for commercial use in the United States, from Serv-Ware.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






