About this product
Rust-Oleum Painter's Touch Ultra Cover in Gloss Black (Rust-Oleum 1979730) is a brush-on enamel in a half pint can, sized for small brush-on jobs. Rust-Oleum describes it as long-lasting protection with excellent coverage, chip resistance and color retention. It is water-based, so brushes clean up with soap and water.
$5.99 shipping, free at $35+, no code needed (lower 48 + DC). 30-day returns on unused, unopened items; opened paint can't be returned (refund policy).
Data sheet facts
Color / size Gloss Black / half pint (Rust-Oleum 1979730) Type Water-based acrylic enamel, brush-on Apply at Air and surface 50-90 F, humidity below 65% Dry time (70 F, 50% RH) Touch 30 minutes, handle 1 hour, fully dry 2-4 hours Practical coverage 40-90 sq ft per quart (gloss), so roughly 10-22 sq ft from a half pint VOC Under 200 g/L (gloss) Clean up Soap and waterGetting a smooth brushed finish
- Wash off dirt, grease, oil and other contaminants with a commercial detergent, rinse with fresh water and let it dry. Remove loose paint and rust with a wire brush or sandpaper.
- Sand smooth, hard or glossy finishes to give the new paint something to grip. Rust-Oleum says the enamel is compatible with most coatings but suggests a test patch.
- Prime bare wood and metal with Rust-Oleum Painter's Touch Primer. Primers can be topcoated after 2-4 hours.
- Stir until settled pigment is mixed back in. Use a good quality synthetic brush and light, even strokes.
- Avoid excessive brushing, which Rust-Oleum says reduces film thickness and protection. Stay out of direct sunlight and off hot surfaces.
Questions
How long before I can handle it? At 70 F and 50% relative humidity, Rust-Oleum lists dry to touch in 30 minutes, dry to handle in 1 hour and fully dry in 2 to 4 hours. Allow more time when it is cooler.
Do I need a primer? Rust-Oleum says Painter's Touch Primer gives superior adhesion and hiding and is especially recommended for bare wood and metal. It lists 1980502 Flat Gray Primer among the recommended primers.
Should I thin it? Thinning is not required. In hot, dry conditions Rust-Oleum says you can thin with up to 2 oz of water per quart to extend dry time.
Sources: Rust-Oleum Painter's Touch Ultra Cover Brush-On technical data; Rust-Oleum data sheet PTX-02. More Rust-Oleum paint and coatings.
Description supplied by Project Weekend DIY through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






