About this product
Painter's Touch Ultra Cover 2X Enamel, Gloss Hunter Green, Half Pint is the Gloss Hunter Green, Half Pint item in this product line.
Features
- Water-based acrylic in PSS Gloss colors
- Chip resistance
- Color retention
Specs
Color or finish Gloss Hunter Green Sheen Gloss Selected size Half Pint Base water-based acrylic for PSS Gloss colors Coverage Gloss: 40-90 sq ft/quart Touch dry Gloss: 30 minutes Recoat Gloss: 2-4 hours Application conditions 50-90°F and below 65% relative humidity Apply with Synthetic brush Thinning Normally none; up to 2 oz water per quart in hot dry conditions Cleanup Soap and water for PSS Gloss colors VOC Gloss: less than 200 Topcoat compatibility Compatible with most coatings; test patch suggested Manufacturer part # 1938730How to apply
Start with the manufacturer's preparation steps: Wash away dirt, grease, oil, salt and contaminants; dry; Remove loose paint or rust; Sand hard glossy surfaces; Primer recommended for bare wood and metal.
- Prepare clean, dry surface
- Stir thoroughly
- Brush in light even strokes
- Wait 2-4 hours before recoating
Questions
How much will I need?
Use these manufacturer coverage figures: Gloss: 40-90 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is Gloss: 2-4 hours. Follow the application conditions and instructions for this product.
Description supplied by Project Weekend DIY through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






