About this product
Painter's Touch Ultra Cover 2X Enamel Brush, Flat White, Half Pint is the Flat White, Half Pint item in this product line.
Features
- Chip resistance
- Color retention
Specs
Color or finish Flat White Sheen Flat Selected size Half Pint Base water-based acrylic as grouped in TDS non-metallic enamel data Coverage 40-90 sq ft/quart Touch dry 30 minutes Recoat 2-4 hours Application conditions 50-90°F; humidity below 65% Apply with Synthetic brush Thinning Not required; up to 2 oz water per quart in hot dry conditions Cleanup Soap and water VOC <190 Topcoat compatibility Compatible with most coatings; test patch suggested Manufacturer part # 1990730How to apply
Start with the manufacturer's preparation steps: Remove contaminants; Rinse and dry; Remove loose paint and rust; Sand glossy surfaces; Primer recommended for bare wood and metal.
Questions
How much will I need?
Use these manufacturer coverage figures: 40-90 sq ft/quart. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 2-4 hours. Follow the application conditions and instructions for this product.
Description supplied by Project Weekend DIY through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






