Skip to main content

Rust-Oleum Painter's Touch 2X Satin Sweet Pea Spray Paint

Sold by Project Weekend DIY

Sponsored
Rust-Oleum Painter's Touch 2X Satin Sweet Pea Spray Paint
$11.28

Opens projectweekenddiy.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Rust-Oleum Painter's Touch 2X Ultra Cover Satin Sweet Pea (model 249063) is a general-purpose aerosol for interior and exterior wood, metal, most plastic, wicker and more. Rust-Oleum rates the 2X Ultra Cover line at about twice the coverage of its other matching general-purpose sprays, with any-angle spray so you can coat hard-to-reach spots, even upside down. This is the 12 oz can in Satin Sweet Pea. Specs below are from Rust-Oleum TDS PT2X-02 (Form GDH-1269, Rev. 013019) for Painter's Touch 2X Ultra Cover Satin sprays.

Specs

Resin Acrylic modified alkyd Finish Satin Sweet Pea Size 12 oz aerosol (fill weight 12 oz) Coverage 8-12 sq ft per can at 1.0-2.0 mils DFT (assumes 15% loss) Dry time (70 F, 50% RH) Touch 20 minutes; handle 1 hour; fully dry 24 hours Recoat Within 1 hour or after 48 hours; clear coat in 2-3 light coats a few minutes apart Spray conditions 50-90 F, humidity below 65%, well ventilated Dry heat resistance 200 F surface temperature max MIR Max 0.95 Clean up Xylene or mineral spirits for wet paint Not for Galvanized steel; objects that may exceed 200 F surface temperature Manufacturer part # 249063 (UPC 020066187200)

How to use it

  1. Wash off dirt, grease, oil, salt and contaminants; rinse and let dry. Remove loose paint and rust with a wire brush or sandpaper. Scarify smooth, hard or glossy finishes by sanding.
  2. For bare wood or metal, Rust-Oleum recommends a Painter's Touch 2X Ultra Cover primer first, such as Painter's Touch 2X Flat Primer.
  3. Shake the can vigorously for one minute after the mixing ball rattles. Shake often during use. Do not strike the can if the ball fails to rattle; contact Rust-Oleum.
  4. Hold the can upright 10-16 in from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can moving. Apply 2 or more light coats a few minutes apart.
  5. When finished, wipe the tip before storing. If the valve clogs, twist and pull off the spray tip and rinse it in mineral spirits. Do not stick a pin into the stem.

FAQ

How much area does one can cover?

Rust-Oleum rates practical coverage at 8-12 sq ft per can at the recommended film thickness. Plan for 2 or more light coats.

When can I recoat or clear-coat?

At 70 F and 50% RH, apply a second coat or clear coat within 1 hour or after 48 hours. On plastic, Rust-Oleum says maximum adhesion and durability develop in 5-7 days.

Can I spray polyethylene plastic?

Some plastics, such as polyethylene storage containers, may not take paint well. Rust-Oleum says to test in a hidden area first.

What temperatures can I spray in?

Use outdoors or in a well-ventilated area such as an open garage when the air is 50-90 F and humidity is below 65%. Avoid very windy or dusty conditions.

Shop more Rust-Oleum, spray paint and spray paint for metal.

Description supplied by Project Weekend DIY through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.