About this product
Product Description
The OSBORN 0002672900 is a knotted cable twist wheel brush designed for aggressive surface preparation and cleaning on angle grinders and small grinders. Built with OSBORN Tufwire steel wire strands formed into cable twist knots, this brush delivers more cutting action than standard knotted wire brushes. The 4-inch outside diameter and 1/4-inch face width make it well-suited for focused, high-pressure wire brushing in tight or contoured areas. Rated to 20,000 RPM, it mounts via a 5/8-11 threaded arbor hole and requires no shank adapter. The filament wire diameter falls in the 0.0200 to 0.0299 inch range, providing a stiff, aggressive cut.
This wheel brush is used in metalworking, fabrication, maintenance, and surface prep applications where scale, rust, weld spatter, or heavy contamination must be removed quickly and thoroughly. It is commonly paired with angle grinders in industrial, contractor, and trade shop settings. The cable twist knot design concentrates wire tension at the brush face, increasing abrasive force per pass compared to standard crimped or straight wire configurations. Installers and fabricators working on structural steel, pipe, plate, or cast surfaces will find it effective for pre-weld and post-weld cleaning.
Key Features
- Cable twist knotted wire construction for aggressive material removal
- 4-inch outside diameter with 1/4-inch face width for focused contact area
- Rated to 20,000 RPM for use with high-speed small angle grinders
- 5/8-11 threaded arbor hole mount -- no shank required
- Tufwire steel wire strands with 7/8-inch trim length for consistent brush geometry
- Filament wire diameter in the 0.0200 to 0.0299 inch range for rigid, aggressive action
Compatibility
Designed for use with angle grinders and small grinders accepting a 5/8-11 threaded arbor hole. Verify that the grinder speed rating meets or exceeds 20,000 RPM before mounting.
Installation Notes
This brush must be installed by a qualified operator familiar with abrasive wheel safety requirements. Always confirm the grinder guard is in place and that the tool RPM rating matches or exceeds the brush maximum RPM before use. Inspect the brush for damage before each use and discard if any deformation, missing wire, or loose knots are observed. Follow ANSI B11 and applicable workplace safety standards when operating wire wheel brushes.
Technical Specifications
- Outside Diameter: 4 inches
- Face Width: 0.25 inches
- Trim Length: 0.875 inches
- Arbor Hole Thread Size: 5/8-11
- Arbor Hole Style: Threaded
- Mount Type: Arbor Hole
- Wire Type: Knotted Cable Twist
- Wire Knot Type: Cable Twist
- Fill Material: Steel
- Filament Wire Diameter Range: 0.0200 to 0.0299 inches
- Maximum RPM: 20,000
- Shank Included: No
- Encapsulated: No
- Weight: 5.496 pounds
- UNSPSC Code: 31191521
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002672900
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






