About this product
Product Description
The OSBORN 0002672300 is a knotted stainless steel wheel brush designed for aggressive surface preparation, weld cleaning, deburring, and rust or scale removal on metal workpieces. The 4-inch outside diameter and knotted wire configuration deliver higher contact pressure and faster material removal compared to crimped-wire designs. Wire diameter falls in the 0.0200-0.0299 inch range, balancing cutting action with wire durability. Rated to 20,000 RPM, this brush is suited for use on angle grinders and compatible right-angle power tools. Installation requires a 5/8-11 threaded arbor. No shank is included with this brush.
This wheel brush is used in fabrication shops, pipefitting, HVAC ductwork fabrication, and general metalworking applications where weld spatter, mill scale, oxidation, or surface contaminants must be removed ahead of inspection, coating, or assembly. The stainless steel fill material makes it appropriate for stainless workpieces where carbon-steel wire contamination is not acceptable. It is also well suited for cleaning heat exchanger components, condenser coils, and copper or stainless piping during service work.
Key Features
- Knotted wire configuration for high-pressure, aggressive surface cutting action
- Stainless steel fill material — safe for use on stainless substrates without cross-contamination
- 4-inch outside diameter with 3/8-inch face width for concentrated brush contact
- 20,000 RPM maximum speed rating for use on high-speed angle grinders
- 5/8-11 threaded arbor mount — direct fit to standard angle grinder spindles
- 7/8-inch trim length for consistent wire projection and brush life
Compatibility
Designed for use on angle grinders and power tools with a 5/8-11 threaded spindle. Verify that the tool's rated no-load RPM does not exceed 20,000 RPM before mounting.
Installation Notes
This brush is installed and serviced by machinists, pipefitters, HVAC fabricators, and general maintenance trades. Always power down and disconnect the grinder from its power source before mounting or removing the brush. Wear appropriate eye and face protection, gloves, and hearing protection when operating wire brushes at speed. Follow ANSI B165.1 and tool manufacturer torque guidance when securing the brush to the spindle arbor.
Technical Specifications
- Outside Diameter: 4 inches
- Face Width: 0.375 inches (3/8 inch)
- Trim Length: 0.875 inches (7/8 inch)
- Arbor Hole Thread Size: 5/8-11
- Wire Type: Knotted
- Fill Material: Stainless Steel
- Filament Wire Diameter Range: 0.0200-0.0299 inches
- Maximum RPM: 20,000
- Mount Type: Threaded
- Shank Included: No
- Encapsulated: No
- Weight: 2.502 pounds
- UNSPSC Code: 31191521
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002672300
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
