About this product
Product Description
The OSBORN 0002671500 is a 4-inch knotted stainless steel wheel brush designed for aggressive surface preparation, weld cleaning, rust removal, and deburring on metal workpieces. The knotted wire configuration delivers concentrated, high-impact abrasion that cuts through scale, mill scale, and oxidation faster than crimped-wire alternatives. Rated to 20,000 RPM, this brush is built for use on angle grinders and die grinders in demanding shop or field environments. The 3/8-24 threaded arbor hole accepts standard threaded spindle adapters commonly found on right-angle grinders. Licensed trade professionals and fabrication shops performing metal prep work on structural steel, pipe, and weld joints are the primary users.
This wheel brush suits applications in industrial fabrication, pipefitting, structural steel work, and maintenance welding. It excels at pre-weld joint cleaning, post-weld slag and spatter removal, and surface conditioning before coating or inspection. The stainless steel fill material is appropriate for use on stainless steel base metals where carbon steel wire contamination must be avoided, as well as general ferrous metal applications. The 3/8-inch face width concentrates wire contact into a narrow working zone, making it effective for cleaning weld beads and tight grooves.
Key Features
- Knotted stainless steel wire for aggressive, high-impact abrasion action
- 4-inch outside diameter rated to 20,000 RPM for use on high-speed grinders
- 3/8-24 threaded arbor hole fits standard angle grinder and die grinder spindles
- 3/8-inch face width focuses cutting action on weld beads, grooves, and narrow surfaces
- Stainless steel fill prevents carbon contamination on stainless or corrosion-sensitive base metals
- Filament wire diameter in the 0.010 to 0.019 inch range balances aggressive cut with wire durability
Compatibility
Designed for use on angle grinders and die grinders equipped with a 3/8-24 threaded spindle. No shank is included; a compatible threaded adapter or arbor must be present on the tool.
Installation Notes
Installation and operation should be performed by qualified metalworkers, pipefitters, or maintenance technicians familiar with abrasive tool safety. Always confirm the tool spindle speed does not exceed the 20,000 RPM maximum rating of the brush before mounting. Wear appropriate PPE including face shield, gloves, and hearing protection during use. Inspect the brush for damaged or broken wires before each use and remove from service if wire damage is found.
Technical Specifications
- Outside Diameter: 4 inches
- Face Width: 0.375 inches
- Arbor Hole Thread Size: 3/8-24
- Wire Type: Knotted
- Fill Material: Stainless Steel
- Filament Wire Diameter Range: 0.010 to 0.019 inches
- Maximum RPM: 20,000
- Trim Length: 0.875 inches
- Mount Type: Threaded
- Shank Included: No
- Weight: 2.76 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002671500
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






