About this product
Novalk Aqua Nova 934 is a durable, fast drying topcoat with good vertical hang.
Novalk 934 is suitable for use as a 1K and can be catalyzed at 5% by volume with NCW-80 hardener for added mar and chemical resistance.
934 can be applied using airless, air assisted airless, or conventional spray, brush or roller. If a base coat is desired use 2 coats of Novalk 917B primer. Sand with 320 or very fine pads between coats. Two coats of topcoat is typically required for this product.
Novalk is packaged in a European container and is filled at 4KG.
15 sheen is the most popular sheen and it is what we recommend for most applications.
Dry times At 4-6 Wet Mils:
Dust Free - 15 minutes
Handling - 30 minutes
OverCoat - 1 hour
Stackable - 8-10 hours
When used as a clear finish, 934 will give wood a warm appearance.
Features:
- Fast drying
- Low VOC - Zero emissions
- High solids - 42%
- Good vertical hang
- Self sealing
- Interior use
- 3 hour pot life at 5% by volume with NCW-80 catalyst
- 4 hour pot life at 5% by volume with NCW-105 catalyst
- Apply at 4-6 mils
- Can be brush/rolled (Novalk 5-10% by volume of 1034 flow additive or 10% water reduction is recommended) Brush then back roll with mohair roller. If using NCW-99 catalyst, add catalyst first and then reduce if necessary. Light colors will require multiple coats if you are brushing/rolling! 932 or Hydrobond is recommended for a brush/roll.
This product is available in clear, white and custom tinted colors from Benjamin Moore, Sherwin Williams, Behr, PPG, and more. All colors are always matched to a 0.5 Delta E or less.
Custom colors are always accurately matched to a 0.5 Delta E or less.
If you are ordering a color for the same job, you must include the HM number on the top of the can.
We match to current manufacturer color chips or fan decks. Paint manufacturer color swatches vary. Always ensure the color is accurate before proceeding with a full scale application.
Airless: Apply with a 408 or 308 fine finish spray tip at 1600-2100 psi. Reduction should not be needed. If you are not adding catalyst, you may reduce with 3-5% warm water or 1034 flow additive if needed.
HVLP Turbine: A minimum 4 or 5 stage HVLP turbine is recommended. Use a 1.8, or 2.0 needle. If needed, start with 3-5% warm water and add as much as 10%. Novalk 1034 flow additive can also be used at 5-10% combined with water.
This product must be applied in an environment where surface, product, and ambient temperatures are above 54F.
Lower temperatures can dramatically increase the viscosity of this product. In the winter we recommend warming the product before spraying or drill mixing in warm water.
Technical data sheets:
Description supplied by Pontiac Paint Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






