About this product
Envirolak Envirothane 800 series is a 1k topcoat with excellent stain resistance and anti-burnishing properties that looks and feels outstanding.
800 series 1K is easy to spray and dries fast with exceptional coverage and high build. The 800 series meets KCMA standards and is suitable for environments like kitchens and bathrooms where a tough coating is needed.
Depending on order volume, custom colors may not ship the same day. Custom color ship dates are updated at the top of each page Monday through Friday.
Custom colors are accurately matched to a 0.5 Delta E or less.
Paint manufacturer color swatches vary. Always ensure the color is accurate before proceeding with a full scale application.
We highly recommend ordering product enough for your job.
800 series offers great leveling and anti-sag properties for vertical applications, and excellent adhesion to most substrates. It can be applied over the T9000 primer in 2 hours in simple air dry conditions.
The 800 series topcoat is available in 3 sheens and can be used with CAT-150 crosslinker for added mar and chemical resistance. It is available in packaged white, and light/medium tone custom colors from Benjamin Moore, Behr, Sherwin Williams, and more!
Technical Sheen Information:
20 sheen (Low Gloss/Low Sheen Satin)
30 sheen (High Sheen Satin)
Typical system for refinishing with a 1K topcoat:
- Prep surface with degreaser and clean (simple green, krud-kutter, insl-x heavy duty degreaser). Rinse with dish soap and water. Let the surface dry.
- Sand with 220-320 sand paper or fine sanding sponges.
- Apply a coat of T9000 bonding/stain blocking primer at 4 mils.
- Wait 1-2 hours, 2 hours to be safe, sand with 320 grit or very fine/super fine sponges.
- Mix in 3% by weight/volume of isocyanate free CAT-150 crosslinker (optional) and apply a coat of Envirothane 800 series 1K topcoat.
- Apply additional topcoat after 1-2 hours, if necessary.
Application recommendations:
Air Assisted Airless: 400-600 PSI fluid pressure. 25PSI air pressure.
Kremlin tip recommendation: 04114, 06114, 09114, 09154
Wagner tips: 0950, 1150, 1350, 1360, 1380
Graco/CA and others: 411, 413, 511, 513, 611, 613
Airless: 2000-2200 PSI fluid pressure
Ultra fine finish spray tips: 308, 408, or 508.
Cup gun: 20-25PSI air pressure
Tips: 1.5 - 1.8 - reduce with water or RX010 reducer if necessary.
The 800 series is meant to be applied at 5-7 mils wet and applied in conditions above 65F and 30% humidity.
Brush & Roll: this product is not recommended for roller or brush application.
Description supplied by Pontiac Paint Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






