About this product
Envirolak's 100 series are 1k or 2k urethane topcoats that provide a lasting, durable finish for wood surfaces.
This product line combines outstanding toughness and stain resistance with the wood warmth and hand-feel of traditional solvent based coatings, all in a low VOC water based finish. EL100 meets or exceeds KCMA standards.
Please note: pails of 100 5, 10 & 20 sheen clear are short filled to 4.7 gallons (18.14KG). The price is lower than the previous 5 gallon pail price. With time, all pails will be filled to 4.7 gallons. Pails of 100 30 are currently 5 gallons until stock is depleted. Single gallons are also now short filled to 113 ounces per container.
If you order Envirolak 200, and the color is too dark for the 200 white base, it will be made with Envirolak 510, we do not tint Envirolak 100 at this time.
100 series can be catalyzed with CAT100-LV hardener or crosslinked with CAT150 crosslinker to improve vertical flow, adhesion, chemical and mar resistance.
If you are using this product with catalyst, the catalyst will raise the sheen 3-6 units depending on the amount added. If your goal is a higher sheen satin finish, we recommend 20 sheen when catalyzing. If you're looking for a lower sheen satin finish, we recommend 10 sheen.
Reduction is not required when spraying with Air Assisted Airless or Airless, however, adding 3% RX010 reducer or 5-10% water will improve application characteristics when used as a clear coat.
Reduction is recommended for pressure pots, HVLP turbine, conventional cup guns or brush and roll. 100 needs to be mixed thoroughly, scraping any solids settled at the bottom, prior to application to ensure consistency and gloss. It needs to be stirred, scraping the bottom, every time you use it.
Airless:
Fluid Pressure: 1800-3000 PSI
Tips: Fine Finish, Ultra Finish or Skill Tip 306, 308, 408, or 508
Reduction: 0-3% RX010 or 0-10% H20
HVLP (Turbine) 5 stage or higher:
Air Pressure: Max
Needle: 1.8-2.0 needle high solids air cap
Reduction: 3-5% ELRX010 or 10-15% water
Spray type: Cup Gun (gravity):
Air Pressure: 25-35 PSI
Tips: 1.8 needle
Reduction: 2-5% ELRX010 or 10-15% Water
Brush: Medium/Firm Nylon or Polyester
Roll: Mohair, Velour or 3/16 Microfiber
Reduction: 3-5% ELRX010 or 10-20% Water
Apply 100 series at 4-6 mils
Number of Coats: 1-3 depending on desired look
Maximum Dry Film Build: 5 mils
Description supplied by Pontiac Paint Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






