About this product
Overview
This 1DSS mini skid steer auger attachment is built for mini skid steers and compact utility loaders of 1,900 - 2,200 lbs and up: 1,452 ft-lbs at 3,000 PSI from 6-16 GPM, on a 2 inch hex shaft. Choose the Mini Universal Quick Attach Mount Package for a standard mini loader plate, the Bobcat Mount Package for the MT series, or Drive Only if the mount is already on the machine.
Key Features of the Digga 1DSS Mini Skid Steer Auger Package
- Torque 1,452 ft-lbs at 3,000 PSI and 1,691 ft-lbs at 3,500 PSI
- Runs from 6 GPM — within reach of a compact utility loader's auxiliary circuit
- Max speed 100 RPM
- 2 inch hex shaft taking A4 earth auger bits, AB4 bolt-on auger bits and RC4 rock and earth combo bits, with a 2-9/16 inch round shaft available
- Drills to 24 inches in earth and 12 inches in clay or shale
- Mounting plate is specific to the make and model of mini loader — tell us your machine and we supply the right one
- 87 inch hoses and flush-face quick disconnects with either mount package
- HALO Alignment Kit optional
- 5 year gearbox and 3 year motor warranty for drilling use
Digga 1DSS Specifications
Choosing the Mount for Your 1DSS
Digga builds the mounting plate to suit the machine, so the make and model go on the order. Terex and ASV frames carry a factory upcharge.
HALO Alignment Kit
Every 1DSS option on this page can be taken with No HALO or with the HALO Alignment Kit. The kit is not a bolt-on: the drive arrives with HALO built into its hood, with the extension cable and in-cab 12V plug. A ring of green lights means plumb and red guides the operator back — which is what replaces walking round the machine to eyeball the auger. Retrofitting an older drive is a separate HALO Retrofit Kit.
Where the 1DSS Sits in Digga's Range
The 1DSS is the smallest planetary drive in Digga's range, turning at 100 RPM from as little as 6 GPM. The 2DSS above it is another 55 percent up, reaching 30 inches in earth against 24. Max speed is 100 RPM. Speed and torque trade against each other, so the smaller drives in this range spin faster and the larger ones pull harder.
What Comes in the 1DSS Package
- Digga 1DSS auger drive
- Mini loader mount in the type you select, built for your machine, unless you choose Drive Only
- 87 inch hoses with flush-face quick disconnects
- HALO where selected
- Not included: auger bits and extensions
Which Mini Loaders Fit the 1DSS?
Fitment comes down to the mounting plate and the auxiliary flow. The 1DSS needs 6 GPM to reach rated torque, which most compact utility loaders provide.
Digga 1DSS Mini Skid Steer Package Questions, Answered
Why do you need my machine make and model?
Because the mounting plate is specific to it. Mini loader plates are not standardised the way a skid steer quick attach is, so Digga builds the plate for the machine. Terex and ASV frames carry a factory upcharge.
Is the 1DSS too much drive for a mini loader?
No. It is rated from 6 GPM, and the limit on a mini loader is usually the machine's weight rather than the drive. Bigger augers pull the front end around before the drive runs out of torque.
What size holes can I drill?
Up to 24 inches in earth and 12 inches in clay or shale, per Digga. On a light machine the practical ceiling is often lower, because the loader has to lift the loaded auger out.
Which bits fit?
A4 earth auger bits, AB4 bolt-on auger bits and RC4 rock and earth combo bits on the 2 inch hex hub. Round-shaft bits need auger adapters.
Can I use the 1DSS on a skid steer later?
The drive is the same; the mount is not. Moving it to a full-size skid steer means a universal quick attach frame, which is sold as its own package.
How is shipping calculated?
Shipping is calculated at checkout from the weight of your order and your delivery address, and the charge is shown before you complete the order.
On delivery: check the package before you sign. Note any damage on the delivery receipt at the time of delivery, photograph it, and email support@eskidsteer.com — a clean signature makes a carrier claim much harder to win.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
