About this product
Overview
This 1DSS mini excavator auger attachment suits micro and mini excavators of 1,700 - 6,600 lbs (0.75 - 3T). It brings 1,452 ft-lbs at 3,000 PSI on a 2 inch hex shaft, and comes with the mount your boom needs: Single Pin Mount, Double Pin Mount, or Drive Only where the machine already carries one.
Key Features of the Digga 1DSS Excavator Auger Package
- Torque 1,452 ft-lbs at 3,000 PSI and 1,691 ft-lbs at 3,500 PSI
- Recommended flow 6-16 GPM, from 6 GPM
- Max speed 100 RPM
- 2 inch hex shaft taking A4 earth auger bits, AB4 bolt-on auger bits and RC4 rock and earth combo bits
- Drills to 24 inches in earth and 12 inches in clay or shale
- The gearbox follows the bit down the hole, so drilling depth is not lost to drive height
- Pressure relief valve optional
- HALO Alignment Kit optional
- 5 year gearbox and 3 year motor warranty for drilling use, plus lifetime shaft pull-out cover
Digga 1DSS Specifications
Choosing the Mount for Your 1DSS
Pin diameter varies by machine, so enter the make and model with the order and we confirm the mount before it ships. The linkage on this drive is the 75mm size (HI-000393K on excavators) — the 100mm and 130mm linkages belong to larger drives. All three are listed under Auger Drive Mount Linkages.
HALO Alignment Kit
Every 1DSS option on this page can be taken with No HALO or with the HALO Alignment Kit. The kit is not a bolt-on: the drive arrives with HALO built into its hood, with the extension cable and in-cab 12V plug. A ring of green lights means plumb and red guides the operator back — which is what replaces judging plumb from the cab, off to one side of the hole. Retrofitting an older drive is a separate HALO Retrofit Kit.
Where the 1DSS Sits in Digga's Range
The 1DSS is the smallest planetary drive in Digga's range, turning at 100 RPM from as little as 6 GPM. The 2DSS above it is another 55 percent up, reaching 30 inches in earth against 24. Max speed is 100 RPM. Speed and torque trade against each other, so the smaller drives in this range spin faster and the larger ones pull harder.
What Comes in the 1DSS Package
- Digga 1DSS auger drive
- Excavator mount and 75mm linkage, or the backhoe cradle, unless you choose Drive Only
- 87 inch hoses with flush-face quick disconnects
- HALO where selected
- Not included: auger bits and extensions
Which Machines Fit the 1DSS?
Digga builds this package for micro and mini excavators of 1,700 - 6,600 lbs (0.75 - 3T). Within that class, flow and pin size decide the fit:
Digga 1DSS Excavator Package Questions, Answered
Single pin or double pin for the 1DSS?
A single pin lets the drive hang and find vertical on its own, which suits plumb holes. Two pins fix it to the dipper so the boom sets the angle, which suits angled holes and slopes. Match the pin range to the pins on your dipper.
Do I need to remove my quick coupler?
For a pin mount, yes — it pins where the bucket pins. If you would rather keep the coupler on, Digga makes coupler hitches for TAG, Wain Roy, John Deere, Kubota and Bobcat X-Change couplers, sold separately.
What size holes will the 1DSS drill?
Digga rates it to 24 inches in earth and 12 inches in clay or shale. On a machine at the light end of the class, the practical limit is often set by the machine rather than the drive.
Which bits and extensions fit?
A4 earth auger bits, AB4 bolt-on auger bits and RC4 rock and earth combo bits on the 2 inch hex hub, with 2 inch hex auger extensions if you need to drill deeper than the bit reaches.
Which linkage does it take?
The 75mm size. Digga sets linkage by the drive: 75mm for 1DSS through 7DDT, 100mm for the 9K through 30K drives, 130mm for the SD range.
How is shipping calculated?
Shipping is calculated at checkout from the weight of your order and your delivery address, and the charge is shown before you complete the order.
On delivery: check the package before you sign. Note any damage on the delivery receipt at the time of delivery, photograph it, and email support@eskidsteer.com — a clean signature makes a carrier claim much harder to win.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
