About this product
W10082853 / WPW10082853 Dishwasher Tine Pivot Clip
Key Features
- High-Temperature Structural Polymer: Manufactured from a specialized, reinforced plastic designed to withstand the intense thermal stress of "Sani-Rinse" and "Heated Dry" cycles without warping or becoming brittle over time.
- Precision Hinge Mechanism: Features a smooth-rotating pivot point that allows your lower rack tines to fold down for large pots and pans or stand upright for plates, maximizing your dishwasher's loading flexibility.
- Snap-Lock Wire Attachment: Designed with a tool-free "snap-on" mounting system that clicks securely onto the lower rack's metal wire frame, providing a stable fit that resists the vibration of high-pressure wash cycles.
- Detergent-Resistant Construction: 100% rust-proof and resistant to the caustic enzymes and chemicals found in modern dishwasher detergent pods and rinse aids.
Replaces / Cross-Reference Part Numbers
- WPW10082853
- AP6014920
- PS11748190
- WPW10082853VP
- 1446946
- PS1734891
- AP4262208
- AH1734891
- EA1734891
- EAP11748190
Compatibility & Fitment
This tine pivot clip is the standard replacement for the lower rack of most Whirlpool-manufactured dishwashers. Key compatible brands include:
- Whirlpool & Maytag: Fits hundreds of WDT, WDF, and MDB series models (e.g., WDT720PADM, MDB4949SHZ).
- Kenmore (665 Series): Compatible with various 665-prefix "Elite" and standard dishwashers (e.g., 665.13263K311).
- KitchenAid: Fits many KDTM, KDTE, and KUDC series units (e.g., KDTE104ESS, KUDC10FXSS).
- Amana & Jenn-Air: Direct fit for dozens of ADB and JDT series models utilizing the W10082853 clip style.
- Note: Specifically for the Lower Rack tines. If you are looking for upper rack tine clips, the mounting style and size may differ.
When to Replace
- Tines Falling Over: The plate rows won't stay upright when loaded, causing dishes to clatter together or block the spray arm.
- Broken Hinge: The plastic pivot point has snapped due to heavy weight or accidental impact during loading, leaving the tine row loose.
- Brittle Plastic: Visible cracking or "whitening" of the grey plastic, indicating it is about to fail under the heat of the next wash cycle.
- Tines Won't Fold: Mineral buildup or warped plastic has seized the hinge, making it impossible to lay the tines flat for larger cookware.
- Missing Clips: Pivot clips have detached and were lost or melted against the dishwasher's heating element at the bottom of the tub.
Installation Tips
- No Tools Required: This is a simple "snap-in" repair. Remove the lower dish rack from the dishwasher and place it on a flat surface for easier access to the tine rows.
- Removing the Old Clip: If the old clip is still attached, use your thumb or a small flat-head screwdriver to gently spread the locking tabs away from the rack wire. Be careful not to bend the metal rack.
- Clean the Wire Frame: Wipe away any old food particles or calcium deposits from the rack wire where the new clip will attach to ensure a secure, permanent lock.
- Alignment: Place the tine wire into the hinge slot of the new W10082853 clip first, then snap the base of the clip onto the main horizontal rack wire.
- The "Click" Test: Press firmly until you hear a distinct "click." Test the movement of the tine row to ensure it rotates smoothly and locks into the upright position correctly.
Description supplied by BlueStars Parts through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
