W10082853 Dishwasher Tine Pivot Clip for Whirlpool Kenmore KitchenAid Dishwashers - 2 Pack

W10082853 / WPW10082853 Dishwasher Tine Pivot Clip

Key Features

• Reinforced Structural Polymer: Manufactured from a high-density, heat-stabilized plastic designed to withstand the intense thermal cycling of "Sani-Rinse" and "High-Temp Wash" cycles without warping or becoming brittle.
• Precision Snap-Fit Hinge: Engineered with a standardized pivot interface that allows folding tines to rotate smoothly, giving you the flexibility to lay tines flat for large pots or stand them upright for plates.
• Vibration-Resistant Grip: Features a specialized "locking-jaw" design that snaps securely onto the dishwasher rack's metal wire, preventing the tines from collapsing or rattling during high-pressure wash cycles.
• Corrosion-Proof Construction: 100% rust-proof and resistant to the caustic enzymes, surfactants, and high-pH chemicals found in modern dishwasher detergent pods and rinse aids.
• Complete 2-Piece Maintenance Set: This value pack provides a full replacement for a single tine row or selective replacement for multiple locations, restoring the organized loading capacity of your dish rack.

Replaces / Cross-Reference Part Numbers

• WPW10082853
• AP6014920
• PS11748190
• WPW10082853VP
• 1446946
• PS1734891
• AP4262208
• AH1734891
• EA1734891
• EAP11748190

Compatibility & Fitment

This tine pivot clip is the standard hinge component for the adjustable racks of most Whirlpool-manufactured dishwashers. Key compatible brands include:

• Whirlpool & Maytag: Fits hundreds of WDT, WDF, and MDB series models (e.g., WDT720PADM, MDB4949SHZ, WDF520PADM).
• KitchenAid & Jenn-Air: Compatible with various KDTM, KDTE, and JDT series high-end units (e.g., KDTE104ESS, KUDC10FXSS).
• Kenmore (665 Series): Fits hundreds of 665-prefix "Elite" and standard dishwashers (e.g., 665.13263K311, 665.13282K113).
• Amana & Estate: Direct fit for dozens of ADB and DU series models utilizing the W10082853 clip style.
• Note: These clips are specifically for Folding Tines. They are typically located on the outer edges of the adjustable rows in the upper or lower rack.

When to Replace

• Tines Won't Stay Upright: Your plates are falling over or the tine row collapses under the weight of your dishes because the internal locking tab has snapped.
• Tines Won't Fold Flat: The pivot mechanism is jammed or the plastic has deformed, preventing you from making room for large bowls or pots.
• Missing Hardware: A clip has popped off during a cycle and was lost or melted against the dishwasher's heating element at the bottom of the tub.
• Visible Heat Damage: The grey plastic looks "whitened," brittle, or has visible stress fractures from long-term exposure to high-heat drying.
• Loose/Rattling Racks: The tine rows feel "floppy" and insecure, leading to potential chipping of delicate glassware during the wash.

Installation Tips

• No Specialized Tools Required: This is a simple "snap-on" repair. Open the dishwasher and identify the broken clip at the base of the folding tine row.
• Removing the Old Clip: Most clips can be popped off with firm thumb pressure. If it is stuck, use a small flat-head screwdriver to gently pry the locking tab away from the rack wire.
• Clean the Rack Wire: Before installing the new W10082853 clip, wipe away any old food particles or mineral scale from the metal wire to ensure a secure, permanent lock.
• Orientation: Align the groove of the clip with the rack wire and the pivot hole with the tine row. Press firmly until you hear a distinct "click."
• The "Flip" Test: Fold the tine row up and down several times to ensure it moves smoothly and locks into the upright position securely. It is often helpful to replace both clips on a single row at the same time for balanced tension.