Virnig v50 Open Front Rotary Brush Cutter ¹RBV66-18-O

Cuts up to 6″ diameter trees and exposed blades allow faster cutting for a maintained finish.

• FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
• HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
• STANDARD MOTOR GUARD & SPINDLE GUARD
• ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
• REPLACEABLE FRONT SKID SHOES

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

MODEL RBV66-0 RBV72-0 RBV78-0 RBV84-0 Cut Width 66.0 72.0 78.0 84.0 Overall Cutter Width (Inches) 72.0 78.0 84.0 90.0 Overall Height (Inches) 21.4 Cutter Depth (Inches) 76.3 82.3 88.3 94.3 Deck Height (Inches) 7.3 Push Bar Height (Inches) 20.4 Minimum Cut Height (Inches) 2.0 Cutting Capacity, Diameter (Inches) 6.0 Deck Thickness: Top / Side (Inches) 0.25¹ Recommended Flow Rate (GPM) 14-25 Standard Flow / 25-42 High Flow / 33-45 High Pressure Max Operating Pressure (PSI) 3500 Standard Flow / 4100 High Flow / 4500 High Pressure Approximate Weight (Pounds) 1465² 1550² 1625² 1700² Recommended Loader Capacity Greater than 1500 pounds

¹Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
²High Flow motor options add approximately 70 pounds to model weight.

BLADE TIP SPEEDS (FPM)

Standard Flow Models

MODEL 14 GPM Minimum 18 GPM Maximum RBV66-18-O 11,400 14,660 RBV72-18-O 12,440 15,995 RBV78-18-O 13,475 17,325

Standard Flow Models

MODEL 18 GPM Minimum 25 GPM Maximum RBV66-25-O 11,585 16,090 RBV72-25-O 12,640 17,555 RBV78-25-O 13,695 19,700 RBV84-25-O 14,750 20,485

High Flow Models

MODEL 25 GPM Minimum 33 GPM Maximum RBV66-HF33-O 12,630 16,670 RBV72-HF33-O 13,775 18,185 RBV78-HF33-O 14,925 19,700 RBV84-HF33-O 16,075 21,220

High Flow Models

MODEL 33 GPM Minimum 42 GPM Maximum RBV66-HF42-O 11,065 14,085 RBV72-HF42-O 12,070 15,365 RBV78-HF42-O 13,080 16,645 RBV84-HF42-O 14,085 17,930

High Pressure Models

MODEL 33 GPM Minimum 45 GPM Maximum RBV72-HP45-O 11,780 16,060 RBV78-HP45-O 12,780 17,395 RBV84-HP45-O 13,775 18,735

Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM).

WARNING

Video

Video