About this product
Cuts up to 4″ diameter trees and floating deck provides a consistent cut on uneven terrain.
- FLOATING DECK FOLLOWS THE CONTOUR OF THE GROUND
- FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
- HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS
- CHAIN CURTAIN PREVENTS FLYING DEBRIS
- REPLACEABLE FRONT SKID SHOES
DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.
MODEL RBV60-F RBV66-F RBV72-F RBV78-F Cut Width 60.0 66.0 72.0 78.0 Overall Width (Inches) 66.0 72.0 78.0 84.0 Overall Height (Inches) 20.9 Overall Depth (Inches) 81.8 87.8 93.8 99.8 Deck Height (Inches) 8.8 Minimum Cut Height (Inches) 1.8 Vertical Deck Travel (Inches) 4.625 Cutting Capacity, Diameter (Inches) 4.0 Deck Thickness: Top / Side (Inches) 0.25 / 0.25¹ Recommended Flow Rate (GPM) 14-25 Standard Flow / 25-42 High Flow / 33-45 High Pressure Max Operating Pressure (PSI) 3500 Standard Flow / 4100 High Flow / 4500 High Pressure Approximate Weight (Pounds) 1430² 1560² 1680² 1760² Recommended Loader Capacity Greater than 1500 pounds¹Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
²High Flow motor options add approximately 70 pounds to model weight.
BLADE TIP SPEEDS (FPM)
Standard Flow Models
MODEL 14 GPM Minimum 18 GPM Maximum RBV60-18-F 10,365 13,325 RBV66-18-F 11,400 14,660 RBV72-18-F 12,440 15,995 RBV78-18-F 13,475 17,325Standard Flow Models
MODEL 18 GPM Minimum 25 GPM Maximum RBV60-25-F 10,530 14,630 RBV66-25-F 11,585 16,090 RBV72-25-F 12,640 17,555 RBV78-25-F 13,695 19,700High Flow Models
MODEL 25 GPM Minimum 33 GPM Maximum RBV60-HF33-F 11,480 15,155 RBV66-HF33-F 12,630 16,670 RBV72-HF33-F 13,775 18,185 RBV78-HF33-F 14,925 19,700High Flow Models
MODEL 33 GPM Minimum 42 GPM Maximum RBV60-HF42-F 10,060 12,805 RBV66-HF42-F 11,065 14,085 RBV72-HF42-F 12,070 15,365 RBV78-HF42-F 13,080 16,645High Pressure Models
MODEL 33 GPM Minimum 45 GPM Maximum RBV72-HP45-F 11,780 16,060 RBV78-HP45-F 12,780 17,395Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM).
Download Spec Sheet (PDF)
Download Manual >>
Description supplied by Summit Forge Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
