About this product
Product Description
The RUST-OLEUM 255616 is a gloss alkyd enamel paint formulated for direct-to-metal application in both indoor and outdoor environments. Supplied in a 1,280 fl oz can, it delivers coverage of 265 to 440 square feet per gallon in Safety Yellow, making it a practical choice for high-visibility marking on structural steel, equipment, and facility surfaces. With a VOC content of 100 g/L, a tack-free dry time of 4 hours, and a full cure at 12 hours, it fits into working maintenance schedules without extended downtime. Facility maintenance crews, industrial painters, and plant safety teams are the primary installers of this product.
This coating is suited for industrial, commercial, and facility maintenance applications where safety color coding is required on metal substrates. Common uses include pipe identification, machinery marking, structural steel, and equipment housings. It performs across a wide temperature application window of 32 degrees F to 100 degrees F, making it viable for seasonal outdoor work as well as controlled indoor environments. The gloss finish supports both visibility and cleanability on painted surfaces.
Key Features
- Direct-to-metal formula — no separate primer required on properly prepared steel surfaces
- Safety Yellow gloss finish for high-visibility compliance marking
- Coverage of 265 to 440 square feet per gallon depending on surface porosity and application method
- Tack-free in 4 hours, fully dry in 12 hours, recoat window at 24 hours
- Suitable for indoor and outdoor use across a 32 to 100 degrees F application temperature range
- 100 g/L VOC content
Compatibility
Designed for application on steel and metal substrates in both indoor and outdoor settings. Suitable for use where alkyd enamel coatings meet project or facility specification requirements.
Installation Notes
Surface preparation is critical before application — steel should be clean, dry, and free of rust, grease, and loose mill scale. This product is typically applied by professional painters or maintenance technicians using brush, roller, or spray equipment appropriate for alkyd coatings. Ensure adequate ventilation when applying in enclosed spaces, and observe local VOC regulations and applicable safety codes. Do not apply when surface or ambient temperatures fall outside the 32 to 100 degrees F range or when rain or moisture is expected before the coating reaches tack-free cure.
Technical Specifications
- Product Type: Alkyd Enamel
- Color: Safety Yellow
- Finish: Gloss
- Container Size: 1,280 fl oz
- Container Type: Can
- Coverage: 265 to 440 sq ft/gal
- VOC Content: 100 g/L
- Applicable Material: Steel
- Direct to Metal: Yes
- Indoor/Outdoor: Indoor and Outdoor
- Tack-Free Dry Time: 4 hours
- Full Dry Time: 12 hours
- Recoat Dry Time: 24 hours
- Minimum Application Temperature: 32 degrees F
- Maximum Application Temperature: 100 degrees F
- Package Weight: 10.5 pounds
- Package Height: 7.63 inches
- Package Width: 6.63 inches
- Package Length: 6.63 inches
Standard Information
- Brand: RUST-OLEUM
- Manufacturer Part Number: 255616
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






