About this product
Product Description
The RUST-OLEUM 245382 is a gloss alkyd enamel paint formulated for both indoor and outdoor applications. This oil-based enamel delivers a hard, durable finish suited to metal, wood, and other common trade substrates. It applies direct to metal without a primer on properly prepared surfaces, making it a practical choice for maintenance painting, equipment coatings, and structural touch-up work. Coverage runs 230 to 425 square feet per gallon depending on surface porosity and application method. VOC content is 340 g/L. The finish is tack-free in 4 hours and fully cured in 8 hours, with a recommended recoat window at 24 hours.
This paint is suited for maintenance professionals, facilities crews, and trade contractors who need a reliable alkyd enamel for metal surfaces, structural components, or general industrial maintenance work. The wide temperature application range — 32 to 100 degrees F — supports use across most job site conditions. The gloss finish in Dunes Tan works for both interior and exterior environments, including equipment housings, railings, ductwork supports, and similar surfaces.
Key Features
- Direct-to-metal application — no separate primer required on prepared surfaces
- Gloss finish in Dunes Tan, suitable for indoor and outdoor use
- Coverage of 230 to 425 sq ft per gallon depending on surface condition
- Tack-free in 4 hours, fully dry in 8 hours
- Application temperature range: 32 to 100 degrees F
- 340 g/L VOC content — verify local compliance requirements before use
Compatibility
Designed as an alkyd enamel coating for use on metal, wood, and other prepared surfaces in both indoor and outdoor environments where a hard gloss finish is required.
Installation Notes
Surface preparation is critical for alkyd enamel adhesion — remove rust, loose paint, grease, and moisture before application. Apply with brush, roller, or spray equipment rated for oil-based coatings. Allow full 24-hour recoat time between coats to prevent lifting or wrinkling. Ensure adequate ventilation in enclosed spaces due to solvent content, and follow local regulations regarding VOC compliance and disposal of oil-based paint materials.
Technical Specifications
- Product Type: Alkyd Enamel Paint
- Color: Dunes Tan
- Color Family: Brown
- Finish: Gloss
- Container Size: 1280 fl oz
- Container Type: Can
- Coverage: 230 to 425 sq ft per gallon
- VOC Content: 340 g/L
- Tack-Free Dry Time: 4 hours
- Full Dry Time: 8 hours
- Recoat Dry Time: 24 hours
- Minimum Application Temperature: 32 degrees F
- Maximum Application Temperature: 100 degrees F
- Direct to Metal: Yes
- Indoor/Outdoor: Indoor and Outdoor
- Package Dimensions: 6.63 x 6.63 x 7.75 inches
- Weight: 9.22 pounds
Standard Information
- Brand: RUST-OLEUM
- Manufacturer Part Number: 245382
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






