About this product
Overview
These Bradco SharkBite replacement teeth are a 6-piece set supplied with hardware that bolt onto the SharkBite grapple, which itself mounts to an ISO class II ITA fork rail. They are reversible AR400: when one edge wears, the tooth turns around and the second edge is used. That doubles the usable life of a single set, and it is the reason to fit hardened teeth rather than run the jaw bare.
Key Features of the Bradco Sharkbite Replacement Teeth
- Six-piece set supplied with hardware — everything needed for installation.
- Reversible design gives two wear edges per tooth, doubling usable life from one set.
- AR400 hardened steel, the same abrasion-resistant grade Bradco uses on wear plates elsewhere in the range.
- Bolt-on installation to the SharkBite grapple — no welding.
- Built for construction, landscaping and agricultural operations, Bradco's stated applications.
- Optional rather than required: the SharkBite grapples without them, but grip in demanding material is what they add.
- Supplied as a complete sharkbite teeth set — six bolt on grapple teeth plus hardware, not individual parts to count.
- Reversible grapple teeth in AR400: these are hardened grapple teeth, and the AR400 teeth grade is what resists abrasion.
Why Choose This Sharkbite Replacement Teeth
- Reversibility is the whole economic case. One set, two lives — which is why hardened teeth cost less per hour than they look.
- Teeth are the wear item, not the grapple. Letting them wear past the point of grip transfers the wear to the jaw itself, which is not a bolt-on part.
- Fit them if the material is abrasive. For clean brush and general handling the bare jaw is adequate; for demolition debris and dirty material it is not.
Bradco Reversible Shark Teeth Specifications
Specification Detail Set size 6 pieces Supplied with Hardware for installation Material Reversible AR400 hardened steel Wear edges Two per tooth — reverse when the first is worn Installation Bolt-on Fits Bradco SharkBite grappleThe Pallet Fork System — Three Levels
Bradco builds pallet forks as a three-level system. Each level adds capability to the one below it, and each is bought separately.
Level Product What it adds 1 Pallet forks Carries palletised and rail-mounted loads 2 SharkBite grapple Installs on the ISO class II ITA fork rail — turns the forks into a grapple 3 Reversible Shark Teeth Bolt onto the SharkBite for extra grip in demanding materialThese bolt onto the SharkBite grapple, which installs on Signature Series pallet forks or any other ISO class II ITA rail. That is the full three-level chain: forks, grapple, teeth.
Which Machines Fit This Sharkbite Replacement Teeth?
These teeth are specified by the grapple, not the loader. They bolt onto the Bradco SharkBite grapple, which in turn installs on any ISO-standard class II ITA fork rail. If you do not have a SharkBite, these teeth have nothing to mount to.
Requirement Specification Fits Bradco SharkBite grapple Installation Bolt-on, hardware supplied Requires A SharkBite grapple fitted to an ITA class II fork rail Set 6 piecesIf you are unsure which level of the system you need, contact eskidsteer.com at (866) 757-8337.
Reversible Shark Teeth Questions, Answered
How many teeth are in a set?
Six, supplied with the hardware needed for installation.
What does reversible mean in practice?
Each tooth has two usable wear edges. When the first is worn, you unbolt the tooth, turn it around and refit it — so one set lasts twice as long.
Do I need these?
No. The SharkBite grapples without them. They add grip in abrasive or demanding material, which is where the standard jaw alone struggles.
Will they fit a grapple other than the SharkBite?
They are made for the Bradco SharkBite. Bradco does not publish compatibility with other grapples, so it should not be assumed.
Is this a full grapple tooth set or individual teeth?
A full set of six with hardware. You are not assembling a set from single parts.
When should I reverse them rather than replace them?
When the leading edge has worn to the point that grip drops off. Reversing gives a fresh edge; replacing is only needed once both edges are worn.
Will fitting them change what the grapple can hold?
They add grip rather than capacity. The 14 inch minimum load diameter of the SharkBite is set by jaw geometry and does not change with teeth fitted.
Is AR400 the same steel used elsewhere in the range?
Yes — Bradco uses AR400 abrasion-resistant plate on wear surfaces across the Bradco line, including the mulcher skid shoes. It is the grade specified where material is abrasive.
How is shipping calculated?
Shipping is calculated at checkout — simply add the item to your cart, enter your delivery address, and the shipping charge will be displayed before you complete your order.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
