About this product
This Budget Builder Towing Cast Cam is a Dodge Cummins 12v/24v Camshaft. This is a 370 hp cam from a 12v B-Series Cummins engine, with an approximate 176/202 profile and is great for lowering EGTs and for better spool up. This can be used with stock turbo/injectors as well. This is a great cam to put in during a rebuild for some added power.
- 176/202 profile @ 0.050”
- 107 LSA
- 98 ICL
- 0.254” intake lobe lift
- 0.266” exhaust lobe Lift
We recommend using 1.3" 24v tappets with the Budget Builder Cast Cam regardless of whether it’s going in a 12v, 24v ISB, or 24v ISBE. The cam does still have the 12v fuel pump lobe so be sure to check clearances (especially on a ’03-Up Common Rail utilizing 1.5" tappets). The pump lobe can also be ground off if not needed on these applications.
Break-In Procedure:
- Cam lube on all lobes, lifter faces, and oil pump gears.
- Oil all bearing journals and lifter barrels.
- Always turn engine over by hand before starting, check for clearances and proper timing location.
- Fire up to 1800-2000 RPM for 18-20 minutes.
Zinc Additive: Most oil companies have taken out a percentage of additives that are meant for anti-scuffing for break-in on flat tappet cams. A zinc additive must be added to your oil before you fire up your engine for the first time.
Kit includes
Power Driven 176/202 Towing Cam
Power Driven 1.30 Tappets
Power Driven Stage 2 Pushrods
Power Driven 4.5 Valve Springs
Not available for sale in the state of California
Orders for this item with shipping to California will automatically be canceled and refunded
Description supplied by Power Driven Diesel through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
