About this product
Product Description
The OSBORN 0007576500 is a shank-mounted wheel brush designed for light deburring, surface conditioning, and finishing work on metal and similar substrates. The brush wheel measures 1 inch in outside diameter with a 3/32-inch face width and mounts via a 1/8-inch shank included with the unit. Fill material is nylon loaded with alumina silicate abrasive at a 1000 grit rating, making it well suited for fine surface blending and scratch removal without aggressive stock removal. Rated to 6,000 RPM, it is sized for use in rotary tools, die grinders, and small drill press setups. Technicians and fabricators working in tight clearances or on delicate part features will find this brush practical for controlled finishing passes.
This wheel brush is intended for use in applications requiring fine abrasive action in confined areas. Typical scenarios include weld prep cleaning, light oxide removal, edge conditioning, and finish blending on small machined or fabricated components. The small diameter and shank-drive design allow access to slots, bores, and recessed surfaces where larger tooling cannot reach. It is commonly used in metalworking shops, maintenance environments, and field repair situations by machinists, pipefitters, and general maintenance technicians.
Key Features
- 1-inch outside diameter provides access to tight spaces and recessed features
- Nylon fill with alumina silicate abrasive delivers fine surface conditioning at 1000 grit
- 1/8-inch shank included for direct chuck or collet mounting
- 3/32-inch face width enables precise, controlled contact on narrow surfaces
- 6,000 RPM maximum speed rating compatible with standard rotary and die grinder tooling
- Non-encapsulated construction allows natural bristle flex during use
Compatibility
Designed as an OEM-style replacement or direct-fit wheel brush for use in rotary tools, die grinders, and drill presses accepting a 1/8-inch shank accessory.
Installation Notes
Installation is performed by machinists or maintenance technicians using standard collet or chuck tooling. Confirm the tool spindle speed does not exceed the 6,000 RPM maximum rating before mounting. Always power down and lock out the rotary tool before inserting or removing the brush shank. Wear appropriate eye protection when operating any rotary abrasive brush.
Technical Specifications
- Outside Diameter: 1 inch
- Face Width: 3/32 inch
- Shank Diameter: 1/8 inch (0.1250 inches)
- Fill Material: Nylon
- Abrasive Material: Alumina Silicate
- Grit: 1000
- Maximum RPM: 6,000
- Mount Type: Shank
- Shank Included: Yes
- Encapsulated: No
- Weight: 0.12 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0007576500
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






