Skip to main content

Osborn 0001140200 Wheel Brush 1-1/2 in Crimped Nylon 320 Grit

Sold by Voomi Supply

Sponsored
Osborn 0001140200 Wheel Brush 1-1/2 in Crimped Nylon 320 Grit
$30.40

Opens voomisupply.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Product Description

The OSBORN 0001140200 is a 1-1/2 inch diameter wheel brush designed for surface finishing, deburring, and blending applications. It uses crimped nylon filaments impregnated with 320-grit silicon carbide abrasive, making it well suited for light material removal and surface conditioning on metal, wood, or composite substrates. The brush mounts via a 1/2 inch arbor hole and carries a maximum rated speed of 20,000 RPM. A face width of 1/4 inch and a trim length of 1/4 inch give it a compact profile for precision work in tight areas. Machinists, fabricators, and maintenance technicians are the typical installers and operators of this tool.

This wheel brush is used in bench grinder, drill press, and rotary tool setups where a controlled abrasive action is needed without aggressive stock removal. The 320-grit silicon carbide fill produces a fine finish appropriate for pre-polish prep, light scale removal, and cleaning weld seams on ferrous and non-ferrous metals. Its small diameter makes it practical for detail work and component finishing in both shop and field maintenance settings.

Key Features

  • 1-1/2 inch outside diameter with 1/4 inch face width for compact, precise contact
  • Crimped nylon fill with 320-grit silicon carbide abrasive for fine surface conditioning
  • 1/2 inch arbor hole for standard bench grinder and rotary tool spindle mounting
  • Maximum rated speed of 20,000 RPM
  • 1/4 inch trim length provides controlled flex and consistent abrasive contact
  • No shank included — direct arbor-hole mount only

Compatibility

Designed for use with rotary tools, bench grinders, and drill presses equipped with a 1/2 inch arbor spindle. Verify that the spindle speed of the host tool does not exceed the 20,000 RPM maximum rating of this brush before mounting.

Installation Notes

Always power down and disconnect the host tool before mounting or removing the brush. Confirm the arbor hole seats flush against the spindle flange and that all hardware is properly torqued before operation. Wear appropriate eye protection and follow the tool manufacturer's guard requirements when operating any wheel brush. Do not exceed the 20,000 RPM maximum rated speed marked on this brush.

Technical Specifications

  • Outside Diameter: 1-1/2 inches
  • Face Width: 1/4 inch
  • Trim Length: 1/4 inch
  • Arbor Hole Size: 1/2 inch
  • Mount Type: Arbor Hole
  • Wire Type: Crimped
  • Fill Material: Nylon
  • Abrasive Material: Silicon Carbide
  • Grit: 320
  • Maximum RPM: 20,000
  • Shank Included: No
  • Encapsulated: No
  • Weight: 0.504 pounds

Standard Information

  • Brand: OSBORN
  • Manufacturer Part Number: 0001140200

Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.