About this product
Product Description
The OSBORN 0002240700 is a 4-inch crimped wheel brush designed for surface finishing, deburring, and cleaning operations on metal, plastic, and composite materials. It uses nylon fill material loaded with 320-grit silicon carbide abrasive, making it suited for fine finishing passes where a wire brush would leave unwanted surface damage. The brush mounts via a standard arbor hole and is rated to 12,000 RPM, giving it compatibility with a wide range of bench grinders, angle grinders, and arbor-mounted power tools. Trim length is 3/4 inch. This brush is a direct-use consumable installed by machinists, maintenance technicians, and fabricators.
This wheel brush is appropriate for light to medium deburring, blending, and surface prep work in both shop and field environments. It performs well on aluminum, soft steel, and non-ferrous metals where controlled abrasion is needed without aggressive material removal. The crimped nylon filaments provide consistent contact pressure and conform to irregular surfaces, making this brush useful for contoured parts and edge work. It is not encapsulated, and no shank is included, so proper arbor mounting hardware must be confirmed before use.
Key Features
- 4-inch outside diameter with a 5/8-inch face width for focused surface contact
- Crimped nylon fill with 320-grit silicon carbide abrasive for fine finishing
- Arbor hole mount - no shank included, compatible with standard arbor setups
- 12,000 RPM maximum speed rating for use with common bench and angle grinders
- 3/4-inch trim length provides moderate flex and consistent filament pressure
- Non-encapsulated construction for straightforward replacement and mounting
Compatibility
Designed for use with bench grinders, arbor-mounted grinders, and power tools that accept a standard arbor hole mount and operate at or below 12,000 RPM.
Installation Notes
Installation should be performed by a qualified machinist or maintenance technician familiar with abrasive wheel mounting procedures. Always power down and lock out the tool before mounting or removing the brush. Confirm the arbor diameter and tool RPM rating match the brush specifications before operation. Eye protection and appropriate PPE are required when operating abrasive wheel brushes.
Technical Specifications
- Outside Diameter: 4 inches
- Face Width: 5/8 inches
- Trim Length: 3/4 inches
- Maximum RPM: 12,000
- Fill Material: Nylon
- Abrasive Material: Silicon Carbide
- Grit: 320
- Wire Type: Crimped
- Mount Type: Arbor Hole
- Shank Included: No
- Encapsulated: No
- Weight: 2.628 pounds
- UNSPSC Code: 31191521
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002240700
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
