About this product
📘 Overview
John deere windshield replacement — front Lower Glass — the John Deere replacement for OEM FYD00006272, cut to 31.625"X21.125". It covers 4 published John Deere models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a john deere windshield replacement and listed as a john deere windshield replacement, it is matched to the OEM number rather than offered as a universal fit.
⚙ Key Features of the John Deere 26G Front Lower Glass
- Cut to the OEM FYD00006272 pattern at 31.625"X21.125" — drops into the existing aperture with no trimming
- Direct interchange with OEM FYD00006272 — same mounting points and same fit as the original John Deere part
- One part number across 4 models spanning John Deere excavators — one spare covers a mixed fleet
- Packed for ups — the shipping method Depco specifies for this part
- A true excavator front lower glass — the john deere front lower glass is dimensioned from the original John Deere part, not adapted from a similar one
🔑 Why Fit the OEM FYD00006272 Front Lower Glass Replacement
- Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
- Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
- Ordering a john deere excavator by OEM number removes the guesswork — the front lower glass replacement fitment on this page is published, not inferred
📊 John deere windshield replacement Specifications — OEM FYD00006272
Specification Value OEM part number FYD00006272 Depco part number DFYD00006272 Part type Front Lower Glass Dimensions 31.625"X21.125" Machine class Excavator Models covered 4 Installation Original cab frame, factory glazing seal Shipping method UPS🚜 Which John Deere Models Take the OEM FYD00006272 Front Lower Glass?
This is a machine-specific replacement part matched to OEM FYD00006272, not a universal fit. Fitment follows the published model list below:
Machine group Models John Deere excavators 26G, 30G, 35G, 50GUse the table above to confirm your model, then check the serial-number range before ordering. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
🔗 Parts Often Bought With the FYD00006272 Front Lower Glass
If you are ordering this front lower glass, these john deere parts are the ones that usually go with it:
Part OEM number Why it is listed here John Deere Front Upper Glass for 60G Mini Excavator OEM FYD00004957 the same part for other models John Deere Front Lower Glass for 60G Mini Excavator OEM FYD00004958 the same part for other modelsInspect on arrival, not afterwards: unwrap enough to see the pane while the driver waits, and record any damage on the receipt before signing. A clean Bill of Lading ends any claim against the carrier.
❓ OEM FYD00006272 Front Lower Glass Questions, Answered
Is this an exact replacement for John Deere OEM FYD00006272?
Yes. The Depco DFYD00006272 is a direct interchange for OEM FYD00006272 and fits the original mounting position without modification.
What size is the John Deere Excavator Front Lower Glass?
The front lower glass measures 31.625"X21.125". Measure your existing part before ordering if it has been replaced previously.
Will the FYD00006272 part fit a 26G and a 50G?
Yes. Both the 26G and the 50G are on the published fitment list for OEM FYD00006272, along with 2 other models shown in the compatibility table on this page.
Do I need new seals to fit the FYD00006272 glass?
Not normally. The factory seal is reused, and a replacement glazing strip is only called for if the original has perished.
How does the John Deere Front Lower Glass ship?
John Deere Excavator Front Lower Glass travels on a pallet by LTL freight. Your shipping cost is worked out at checkout from the delivery address, with lift gate available as an option.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
