Skip to main content
John Deere Front Lower Glass for 60G Mini Excavator | Depco

John Deere Front Lower Glass for 60G Mini Excavator | Depco

Sold by eSkidSteer

Sponsored
$229.99

Price and availability requested live for this page. Final details are set by the seller.

Opens eskidsteer.com in a new tab. The seller handles checkout, shipping, and returns.

StorkScout may earn money from Shopify when you buy through product links. Sponsored results are labeled, and compensation never determines the Weekly Edit. How we make money

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

🔎OEM interchange
📦Crated

📘 Overview

John deere windshield replacement — front Lower Glass — the John Deere replacement for OEM FYD00004958, cut to 31.5" X 21". The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a john deere windshield replacement and listed as a john deere windshield replacement, it is matched to the OEM number rather than offered as a universal fit.

⚙ Key Features of the John Deere 60G Front Lower Glass

  • Cut to the OEM FYD00004958 pattern at 31.5" X 21" — drops into the existing aperture with no trimming
  • Direct interchange with OEM FYD00004958 — same mounting points and same fit as the original John Deere part
  • Packed for ups — the shipping method Depco specifies for this part
  • A true excavator front lower glass — the john deere front lower glass is dimensioned from the original John Deere part, not adapted from a similar one

🔑 Why Fit the OEM FYD00004958 Front Lower Glass Replacement

  • Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
  • Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
  • Ordering a john deere excavator by OEM number removes the guesswork — the front lower glass replacement fitment on this page is published, not inferred

📊 John deere windshield replacement Specifications — OEM FYD00004958

Specification Value OEM part number FYD00004958 Depco part number DFYD00004958 Part type Front Lower Glass Dimensions 31.5" X 21" Machine class Excavator Models covered 1 Installation Original cab frame, factory glazing seal Shipping method UPS

🚜 Which John Deere Models Take the OEM FYD00004958 Front Lower Glass?

This is a machine-specific replacement part matched to OEM FYD00004958, not a universal fit. Fitment follows the published model list below:

Machine group Models John Deere excavators 60G

Find your model in the table above and verify the serial-number range before ordering. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.

🔗 Parts Often Bought With the FYD00004958 Front Lower Glass

Other front lower glass parts we stock that connect to this one, whether by side, by kit, or by shared fitment:

Part OEM number Why it is listed here John Deere Front Upper Glass for 60G Mini Excavator OEM FYD00004957 the same part for other models John Deere Mini Excavator Front Lower Glass for 26G, 30G, 35G, 50G OEM FYD00006272 the same part for other models

Inspect on arrival, not afterwards: unwrap enough to see the pane while the driver waits, and record any damage on the receipt before signing. A clean Bill of Lading ends any claim against the carrier.

❓ OEM FYD00004958 Front Lower Glass Questions, Answered

Is this an exact replacement for John Deere OEM FYD00004958?

Yes. The Depco DFYD00004958 is a direct interchange for OEM FYD00004958 and fits the original mounting position without modification.

What size is the John Deere Excavator Front Lower Glass?

The front lower glass measures 31.5" X 21". Measure your existing part before ordering if it has been replaced previously.

How do I confirm the FYD00004958 part fits my machine?

Match OEM part number FYD00004958 against your parts book or the number recorded on the part you are replacing. No model range is published for this part, so the part number is the reliable check.

Do I need new seals to fit the FYD00004958 glass?

No. Installation reuses the factory seal and retaining hardware already in the cab frame, so only a perished glazing strip needs replacing.

How does the John Deere Front Lower Glass ship?

John Deere Excavator Front Lower Glass ships by LTL truck freight. Shipping is calculated at checkout once you enter your delivery address, and lift gate service can be selected there for residential deliveries.

Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.

Current listing
$229.99
Shop at eSkidSteer