About this product
The IE FDS front-mount intercooler replaces the factory core on B9 Audi 2.0T and 3.0T engines with a bar-and-plate core nearly twice the size of stock. Larger surface area combined with IE's Flow Distribution System (FDS) lowers intake air temperature and reduces pressure drop, which is where a tuned car's real power gains come from once heat soak stops holding boost and timing back.
The kit is a complete, drop-in replacement: end tanks attach to the factory hoses, and installation is possible in an afternoon with a standard toolset.
Important Compatibility Information
IE states this intercooler is not compatible with late-model-year B9.5 vehicles equipped with active grille shutters.
Why Upgrade
- Core is nearly twice the size of the factory unit
- IE FDS technology distributes airflow evenly across the core rather than just the center
- Fully machined inlet and outlet to prevent boost leaks
- Cast aluminum end tanks attach directly to factory hoses for a proper fit
- ⅛ NPT bung cast into the inlet end tank for water/meth injection
- Every unit is pressure tested before it ships
Performance
IE has tested this core supporting roughly 650 to 740 horsepower, with an intake air temperature drop of about 20 to 30°C at the end of a full-throttle pull versus stock, and pressure drop cut from around 1 PSI to 0.3 PSI at Stage 1 power levels.
What's Included
- IE FDS intercooler core with cast aluminum end tanks
- Mounting hardware and hose clamps
Installation Notes
Installation requires a standard toolset, a couple of Torx bits, and some mechanical familiarity; IE describes it as an afternoon job. IE's install guide covers the full process.
Product Specifications
- SKU: I00W IETPCK1 (Silver) / I00W IETPCK1-BK (Black)
- MPN: IETPCK1 (Silver), IETPCK1-BK (Black)
- Core size: 21.25" x 17.5" x 2.5", bar-and-plate construction
- Water/meth ready: ⅛ NPT bung in inlet end tank
- Fitment: B9/B9.5 Audi A4, A5, S4, S5, SQ5 2.0T/3.0T
Frequently Asked Questions
What finish options are available?
This intercooler ships in raw aluminum (Silver) or black powder coat; both use the same core and hardware.
Does this fit a car with active grille shutters?
IE states it is not compatible with late-model-year B9.5 vehicles equipped with active grille shutters. Check with your BMP Tuning rep if you're unsure whether your car has this option.
Do I need to modify anything to install this?
No. It's a complete, drop-in kit that attaches to the factory hoses and mounting points without cutting or modification.
Is this compatible with water/meth injection?
Yes, the inlet end tank has a cast-in ⅛ NPT bung for a water/meth nozzle.
Description supplied by BMP Tuning through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
