EDIC® Aluminum Squeegee Wand with Spray Jet, 13" Head, 1200 PSI #334ACH

Rinsing a restroom or kitchen floor usually takes two tools and two passes: something to spray the floor, then a squeegee or wet vac to pick the water back up. The EDIC 334ACH aluminum squeegee wand does both at once.

Its 13 inch squeegee head carries a single spray jet fed by your extractor's solution line. Squeeze the trigger and the jet rinses the floor just ahead of the blade while the vacuum pulls the dirty water through the head, so the floor is clean and nearly dry behind you.

It's the squeegee wand in EDIC's touchless restroom kit for the Endeavor, it's rated up to 1200 PSI, and it fits any EDIC extractor with a 1-1/2 inch vacuum hose.

• 13 inch head with a single spray jet: rinse and pick up in the same stroke instead of spraying, then going back with a squeegee.

• Trigger valve at the handle: the jet only runs while you squeeze, so you rinse where the floor needs it and don't flood the rest.

• Light, durable 1-1/2 inch aluminum vacuum tube: about 5 lb, so it's easy to work under partitions and around fixtures all shift.

• Rated up to 1200 PSI: handles the Endeavor's full pressure. On lower pressure Galaxy extractors it still rinses, with a gentler stream.

• Brass quick disconnect on the solution line clicks onto the solution hose of your hose assembly.

Cleaning restrooms with an Endeavor? The 9034ACK touchless restroom kit ($596) pairs this wand with the 9000AC high/low pressure spray gun ($161) for applying chemical and rinsing walls and fixtures.

Bought the Endeavor machine only? The wand runs on the 2540AC-HP 25 ft hose assembly ($202), the same hose that comes in every Endeavor kit.

Found a lower price? Call or message us and we'll beat it. Returns follow our return policy.

Not sure it fits your machine? Call (855) 601-5678 or message us with your model number.