About this product
A one-inch griddle plate is what you want when the flat top is loaded from open to close. The Dukers DCGMA24 brings that heavy plate to a compact 24-inch footprint, a good match for diners, breakfast cafes and food trucks that cook a lot in a small space.
Two 30,000 BTU/hr burners (60,000 BTU/hr total) heat a 1" thick polished steel plate with a 23.83" x 24.02" cooking area, deeper than the standard DCGM plate. It is 24" wide, 33-1/2" deep and 15-1/4" high, and weighs about 243 lb.
What you will notice in day-to-day use
- Heavy plate, even results. 1" thick polished steel gives you the mass for consistent browning on pancakes, patties and grilled sandwiches alike.
- Simple, reliable controls. Manual valves every 12" are easy for any cook to learn, and each section adjusts on its own.
- Quick to fire up. Standby pilots on each burner mean lighting up in the morning takes seconds.
- Cleanup that does not drag on. The full-length seamless drip pan pulls out and washes easily, and the stainless steel body wipes down at closing.
- Fits your setup. Adjustable stainless steel legs raise the griddle from 15-1/4" to 17-5/8", and the stainless steel body is easy to keep clean.
Choosing your setup
Gas type: choose natural gas or LP above to match your kitchen. Dukers ships each griddle set for natural gas and includes the LP conversion kit; per-gas values are below.
Gas Each burner Total input Gas pressure Nozzle Natural gas 30,000 BTU/hr 60,000 BTU/hr 4" W.C. #37 Liquid propane 30,000 BTU/hr 60,000 BTU/hr 10" W.C. #51Specifications
Brand Dukers Model DCGMA24 Type Countertop gas griddle, manual controls Burners 2 x 30,000 BTU/hr, standby pilots Total input 60,000 BTU/hr Controls Independent manual control every 12" Griddle plate 1" thick polished steel Cooking area 23.83" x 24.02" Gas type Ships for natural gas; LP conversion kit included Gas connection 3/4" NPT Construction Stainless steel exterior and interior Legs Adjustable, 15-1/4" – 17-5/8" high Dimensions (W x D x H) 24" x 33-1/2" x 15-1/4" Net weight 243 lb Shipping weight 265 lbBefore it arrives
- Gas: 3/4" NPT inlet; a qualified installer should connect it and fit the LP kit if needed.
- Ventilation: install it under a commercial hood following your local code.
- Counter or stand: 24" wide and 33-1/2" deep, about 243 lb, so use a sturdy, non-combustible counter or stand and keep the clearances in the installation manual.
Warranty
1 year parts and labor from Dukers.
Specifications per Dukers data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






