About this product
The Pad Holder That Drives Your CA60's Floor Pads
Every floor pad on your Clarke CA60 20D or 20TD rides on this pad holder. Its gripper face holds a standard 20-inch pad flat against the floor, and the center lock keeps the pad from walking off the holder while it spins. When the face wears smooth, pads start to slip and scrub unevenly, and that's the time to replace it.
VS13777 is the "pad holder 19 complete" in the CA60 disc deck parts list, so it's the holder Clarke designed for these machines. A second one also lets you keep two pad colors ready, for example a red pad for nightly scrubbing and a black pad for stripping, and swap them in seconds.
Why You'll Love This Pad Holder
Takes standard 20-inch pads. Red, blue, black or white, from any pad maker.
Center lock included. It's the complete assembly, so the pad stays centered.
Locks on with a button. The CA60 disc deck seats and releases the holder from the control panel.
Genuine Clarke part. The number listed in the CA60 operator manual and parts list.
How to Fit the Pad Holder
Center a 20-inch pad on the holder and lock it with the center lock. With the deck raised, slide the holder under the deck, lift it to engage the hub and turn it clockwise as seen from above. Lower the deck, press the OneTouch scrub button and hold one of the brush switches for half a second, and the machine seats it. To remove it, raise the deck and press the brush release button. The steps are in the CA60 Use and Care guide. Pad holders are wear items and aren't covered by Nilfisk's machine warranty except for manufacturing defects.
Which pad goes on this pad holder? Our floor pad color chart explains what each color does.
Clarke VS13777 Pad Holder Specifications
Brand Clarke (Nilfisk) Part Number VS13777 Type Pad holder (pad driver), complete with center lock Holder Size 19 in Pad Size 20 in floor pads Fits Clarke CA60 20D and 20TD (disc models) Does Not Fit CA60 20B and 24B (BOOST orbital)For grout and textured floors, swap in the VF91040 disc scrub brush instead.
Not sure which part you need? Send us your machine model or serial number, call (855) 601-5678 or email support@oneupcleaning.com, and we'll confirm the fit before you order.
Description supplied by OneUp Cleaning through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
