About this product
About This Socket - RT120RD
Add this caster socket to a round tube leg with a 0.777-inch inside diameter so a 7/16-inch grip-ring stem caster can drop straight in, where the tube has no built-in receiver for a stem.
The socket presses into the tube and gives a sized receiver that holds the stem of a 7/16-inch grip-ring caster, so a chair, table, or equipment leg built from round tube can take a caster without welding or a new plate. This is the smallest tube in the RT12x range, sized for a 0.777-inch inside diameter; measure your tube's inside diameter and match the socket to it, because a socket that is too loose will not hold the load.
Ideal applications
- Round tube legs measuring 0.777 inches inside diameter
- A 7/16-inch grip-ring stem caster pressed into round tube
- Converting a fixed tube-leg base into a rolling one
If your tube measures a different inside diameter, step up to the 0.872-inch RT123RD or the 0.902-inch RT125RD and match the socket to your tube.
Pairs with: the 7/16-inch grip-ring stem caster that drops into it. See the Shepherd collection.
Wrong fit? Larger tube or a flat frame? See the larger RT126RD socket and top-plate casters in the Shepherd collection.
Also in this family: the 0.872-inch RT123RD, or the full Shepherd collection.
Description supplied by Caster Central through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






