Skip to main content

Carpet Pro FBP-14PW Upright Bearing End Holder

Sold by Vacuums and More

Sponsored
Carpet Pro FBP-14PW Upright Bearing End Holder
$15.99

Opens evacuumsandmore.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

At either tip of the spinning brush on these commercial machines, a bearing rides inside a molded cradle that keeps it seated squarely within the nozzle housing, and part C012-1500 replaces it, released originally under Fuller Brush's FBP-14PW line.

Beyond that machine, the identical piece serves Titan's T4000, T4000.2, TC6000 and TC6000.2, the Maytag M700, the Clean Max CMPSQD, the FBMMPWCF4 and FBPHD2T, and a run of Carpet Pro numbers spanning the CMP3QD, CPU1QD, CPU1T, CPU2T, CPU3N, CPU3QD, CPU4N and CPU4T. Once this cradle wears through or splits, its end of the brush roller sags out of true rather than sitting level. A rumble or knock from the nozzle is usually the first hint, followed later by a stripe of carpet the brush no longer agitates and a drive belt drifting steadily toward the pulley's edge.

Since the pair of cradles work together to hold the roller centered, wear on just one side tilts the angle the belt rides at on the pulley end, and it is that tilt, not a fault with the belt itself, that actually walks it off track. Swapping belt after belt without ever checking these cradles is a common way to chase the same symptom without ever solving it.

Install the replacements as a matched pair whenever both sides show wear, since putting a fresh cradle on only one end just tips the roller toward the worn side instead.

  • Part: C012-1500, bearing end holder
  • Fits: Fuller Brush FBP-14PW, FBMMPWCF4, FBPHD2T, Carpet Pro CMP3QD, CPU1QD, CPU1T, CPU2T, CPU3N, CPU3QD, CPU4N, CPU4T, Clean Max CMPSQD, Maytag M700, Titan T4000, T4000.2, TC6000, TC6000.2
  • Function: locates a brush roll bearing inside the nozzle housing
  • Replace when: the nozzle rumbles or knocks, or the drive belt keeps drifting off its pulley
  • Common mistake: replacing the belt repeatedly without checking the holders that are actually causing the drift

Cross-reference: part number 09-3628-07

Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.