About this product
Part B014-0714 is a CleanMax flat drive belt built for Carpet Pro's commercial upright lineup. Coverage runs across the CPU-1 through CPU-4 family, including the CPU-1QD, CPU-1T, CPU-2T, CPU-3N, CPU-3QD and CPU-4N, plus the CMP-3N, CMP-3QD and CMP-3T models. It also fits Clean Max's CMPS-QD upright and Fuller Brush's FBHD1, FBHD1T, FBMM1T and FBP-14PW models.
On equipment run every shift, a flat belt rarely fails by snapping outright. It lengthens gradually until the brush roll can no longer keep pace with the motor. Passes stop leaving a groomed stripe, pet hair stays trapped in the pile instead of lifting free, and a faint burnt-rubber note often turns up ten or fifteen minutes into a shift once the slip has warmed things enough to smell.
For a machine earning its keep daily, swapping the belt on a set schedule beats letting it fail mid-shift. A belt that keeps slipping also wears a groove into the motor pulley the whole time it is loose, so a late change ends up costing more than the belt by itself once that groove shows.
- Part: B014-0714, commercial flat belt
- Fits: Carpet Pro CPU-1/1QD/1T/2/2T/3N/3QD/4N/4T, CMP-3N/3QD/3T; Clean Max CMPS-QD; Fuller Brush FBHD1/FBHD1T/FBMM1T/FBP-14PW
- Symptom: uneven grooming, pet hair left behind, burnt-rubber note mid-shift
- Change alongside: check the motor pulley for a worn groove if the old belt had been slipping
Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
