Carbide Tipped Triflow Auger Bit Pilot Tooth | Pengo Attachments By Paladin

Overview

This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It weighs 5.5 lb and carries Pengo soil rating 4 – 5, suiting clay and gravel. Like every TriFlow 350 pilot it uses three drill points rather than one, which is what gives the family its wear life and keeps the auger tracking straight from the first turn. It mounts into the auger head itself, so fitment follows the Pengo Aggressor or TriMax head rather than the machine quick attach behind it.

Key Features of the Pengo Carbide Tipped Triflow Auger Bit Pilot Tooth

• Rated 4-5 on the Pengo soil chart — clay and gravel, the hardest ground the TriFlow family covers.
• The extreme carbide pilot bit of the TriFlow range, Pengo part 135090.
• Uses a carbide auger tip on the three-point TriFlow body rather than hardfacing alone.
• Pengo soil rating 4 – 5 — clay and gravel, so the grade is matched to ground rather than guessed.
• TriFlow 350 three-point design — three drill points spread the work and extend service life against a single-point pilot.
• 5.5 lb, a direct replacement TF-350C pilot bit for Pengo Aggressor and TriMax augers.
• Genuine Pengo part, ordered by Pengo part number rather than an aftermarket equivalent — the same catalogue that lists Pengo auger teeth and holders.
• A triflow pilot bit is the centre of the cutting set, working with the auger bit teeth around the head rather than replacing them.

Why the Right Carbide Tipped Auger Pilot Bit Matters

• The pilot goes in first. It sets the hole centre and pulls the auger down — a worn or wrong-grade pilot makes the whole auger work harder.
• Three drill points, not one. The TriFlow design spreads wear across three cutting points, which is why the family lasts longer than a conventional pilot bit.
• Grade matched to ground. Running a standard pilot in gravel wastes it quickly; running carbide in soft dirt spends money on wear resistance you never use.
• Replacing the pilot is cheaper than replacing the auger. The pilot is the consumable that protects the head behind it.
• One pilot bit for auger work across the season. Because grades share fitment, changing ground means changing the pilot rather than the whole cutting set.

Pengo Carbide Tipped Triflow Auger Bit Pilot Tooth Specifications

Specification Detail Pengo model TF-350C Part number 135090 Weight 5.5 lb Pengo soil rating 4 – 5 Suited to clay and gravel Design TriFlow 350, three drill points Fits Pengo Aggressor and TriMax augers

Which TriFlow 350 Pilot Grade Do You Need?

Pengo builds the TriFlow 350 pilot in five grades. They share the same three-point design and the same fitment — the difference is the ground each is rated for, and how much wear protection you are paying for.

Grade Pengo model Part number Weight Soil rating Best in Standard TF-350 135088 5 lb 1 – 2 – 3 Dirt, sand, silt Hardface TF-350HF 135089 5.5 lb 2 – 3 – 4 Sand, silt, clay Hardface carbide TF-350HFTC 135092 5.5 lb 2 – 3 – 4 Sand, silt, clay — abrasive Carbide TF-350CXC 135091 5.8 lb 2 – 3 – 4 – 5 Sand through gravel — widest range Carbide tipped TF-350C 135090 5.5 lb 4 – 5 Clay, gravel

For a wider soil range the TF-350CXC carbide pilot covers 2-3-4-5. For softer or merely abrasive ground the TF-350HFTC hardface carbide, TF-350HF hardface and standard TF-350 pilots cover ratings 1 through 4 at lower cost.

Which Augers Fit This TriFlow Pilot?

The TriFlow 350 pilot fits Pengo Aggressor and TriMax augers, which mount to skid steer loaders, mini excavators and backhoes through a Pengo auger drive. The pilot threads into the auger head, so fitment is decided by the auger, not by the machine driving it.

Fitment Detail Auger families Pengo Aggressor, Pengo TriMax Carriers Skid steer, mini excavator, backhoe (via Pengo auger drive) Position Centre pilot — leads the auger into the ground Design TriFlow 350, three drill points

If you are unsure which grade suits your ground, or which pilot your auger head takes, contact eskidsteer.com at (866) 757-8337.

Carbide Tipped Triflow Auger Bit Pilot Tooth Questions, Answered