About this product
Clears brush and young trees | 5 feet wide every pass
Take back your overgrown land, 5 feet at a time.
Fence lines lost in brush. Trails you can't get through. Saplings creeping into the field. The MP348 grinds brush and young trees up to 4 inches thick into fine mulch, right where they stand, and clears a 5-foot-wide path every pass.
No chainsaw, no burn pile, no dragging brush. It runs straight off your tractor's 540 PTO, so if you have 25 to 50 HP, you're ready to go.
What you can clear with it
Fence lines
Clear the brush swallowing your fence so you can see and fix it.
Trails and paths
Open up 5-foot-wide walking, ATV and horse trails in one pass.
Hunting lanes and food plots
Cut shooting lanes and prep plots before the season.
Saplings and young trees
Stop young trees from taking over, up to 4 inches thick on a 40 HP hydrostatic.
Thick brush and undergrowth
Knock down the tangles you can't walk through.
Overgrown lots and field edges
Push the overgrowth back and take your acreage back.
As easy as 1, 2, 3
1
Back up and hook on
CAT 1 three-point hitch, quick hitch ready. Connect the PTO.
2
Engage the PTO
No hoses, no hydraulics. Your tractor's PTO spins the rotor.
3
Drive slow and steady
Brush goes in, fine mulch stays on the ground behind you.
Clears brush up to 4 inches
Young trees too
This is not a mower. On a 40 HP hydrostatic tractor, it chews through brush and young trees up to 4 inches thick. On a gear-drive tractor, plan on about half that. See the brush chart below for your horsepower.
60-inch cutting path
Wide coverage, fewer passes
The 48-inch rotor clears a 60-inch path with every pass. That's 5 feet at a time, so more land gets done in fewer trips.
60 carbide teeth
Fine, clean mulch
Sixty high speed carbide teeth chip brush apart instead of smashing it. You get fine mulch on the ground, not piles of sticks to pick up.
Automatic slip clutch
Protects your tractor
Land hides rocks, stumps and old posts. Hit one and the slip clutch lets go, so your gearbox and drive parts stay safe. One bad hit won't turn into a big repair bill.
CAT 1 three-point hitch
Quick hitch ready
It fits a standard Category 1 three-point hitch and works with a quick hitch. Back up, hook on, connect the PTO and you're cutting.
Cuts level with the ground
A clean finish
It cuts right down to ground level. No tall stubs left behind, so your land looks cleared, not half done.
1,050 pounds
Built for mid-size tractors
It's built heavier than the compact MP330 to handle a wider rotor. Make sure your three-point hitch can lift 1,050 pounds.
6 free replacement teeth
Ready for the next job
Every order ships with 6 spare teeth at no cost. Break a tooth? Swap it and keep going. No parts run, no waiting on a box.
Saves you money
$0 freight
Yours ships free, there's no sales tax outside Florida, and we price match. Outside Florida, the price you see is the price you pay.
Cutting path
60"
One machine does the crew's job
Brush goes in, mulch comes out and stays on the ground. No cutting, piling and hauling, and no second machine. Your land gets cleared on your schedule.
Features and benefits
PTO drive, no hydraulics: Runs straight off your 540 RPM PTO.
25 to 50 HP tractor range: Fits mid-size tractors.
Up to 4-inch brush: On a 40 HP hydrostatic tractor.
60-inch cutting path: 48-inch rotor.
60 high speed carbide teeth: Chip brush into fine mulch.
Automatic slip clutch: Saves your gearbox and drive parts.
CAT 1 quick hitch ready: Standard fit and fast hookups.
Ground level cutting: No stubs left behind.
6 free replacement teeth: Included with every order.
Authorized Baumalight dealer: Your one year manufacturer warranty is honored.
Free 5–7 day shipping: No freight bill, tracking by email.
Pay over time: Shop Pay Installments at checkout.
Price match and 30-day returns: Buy with zero risk.
Specifications: compare every MP model
You're looking at the MP348, highlighted in orange. Match your tractor's horsepower, hitch and hydraulics to the right model below.
Swipe or scroll sideways to see every model →
This model MP360 MP560 MP572 MP972 Path width 41.75" 60" 72" 75" 87" 84" Rotor width 30" 48" 60" 60" 72" 72" Max engine HP 40 50 55 75 125 @ 540 RPM / 135 @ 1,000 RPM 125 @ 540 RPM / 135 @ 1,000 RPM Max PTO HP 35 40 45 65 115 @ 540 RPM / 125 @ 1,000 RPM 115 @ 540 RPM / 125 @ 1,000 RPM Min engine HP 15 25 30 45 50 90 Cutting depth Level Level Level 1.5" above to 1" below grade 1.5" above to 1" below grade Level to 2" below grade Cutting style High speed teeth High speed teeth High speed teeth Carbide tipped bolt-in Carbide tipped bolt-in Double tipped Tooth part number H3000 H3000 H3000 P5000 P5000 R9000 Number of cutters 36 60 74 92 112 43 Rotor shaft size 2" 2" 2" 2" 2" 2" Rotor diameter (tool tips) 15" 15" 15" 15" 15" 18.5" Rotor weight (with tools) 188 lbs 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs Hitch size CAT 1 CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3 Quick hitch compatible Yes Yes Yes No No No PTO drive speed 540 540 540 540 1,000 1,000 Drive speed options — — — — 540 (max engine HP 110) 540 (max engine HP 110) Gearbox spline size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" Tractor end spline size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" System protection Slip clutch Slip clutch Slip clutch Slip clutch Slip clutch Slip clutch Unit weight 525 lbs 1,050 lbs 1,200 lbs 2,145 lbs 2,500 lbs 3,200 lbs Hydraulic requirements None None None 1 remote 1 remote 2 remotes
How thick can it cut?
Maximum brush diameter for the 300 Series (MP348 included), running at 1,800 rotor RPM. The slower you feed it, the bigger the brush it handles. Find your tractor's horsepower and how you'll drive.
Brush diameter in inches. Always stay within your model's maximum horsepower in the spec table above.
What you need to run it
A tractor with 25 to 50 HP (40 HP max at the PTO). A 540 RPM PTO with a 1-3/8" spline. A Category 1 three-point hitch that can lift 1,050 pounds. No hydraulics needed.
If your tractor has those things, the MP348 fits and works. Not sure? Call us at 800-260-8983 and we'll check your tractor with you.
Hear it from a real owner
An honest MP348 review after putting it to work
Shipping
Delivery
5-7 days
Free delivery in 5-7 days. Your tracking number is emailed once your order ships.
Tracking
Your tracking number comes once your order ships. Track your order anytime at sullivanequipmentco.com/apps/parcelpanel.
If you have any questions, call or email us. Real people, Mon–Sat, 7AM–5PM EST.
Warranty
Coverage
One Year
One Year Manufacturer Warranty Included
What's covered
Your MP348 is backed by Baumalight for one year. You buy from an authorized Baumalight dealer, so your manufacturer warranty is honored.
What's not covered
Baumalight sets the exact terms. Call or email us and we'll send you the full warranty details before you buy.
If you have any questions, call or email us. Real people, Mon–Sat, 7AM–5PM EST.
Description supplied by Sullivan Equipment Co through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
