Skip to main content
Baumalight DPH530 3-Point Hitch Tractor Tree Saw, image 1 of 10
1 / 10

Baumalight DPH530 3-Point Hitch Tractor Tree Saw

Sold by Sullivan Equipment Co

Sponsored
$4,403.00

Price and availability requested live for this page. Final details are set by the seller.

Opens sullivanequipmentco.com in a new tab. The seller handles checkout, shipping, and returns.

StorkScout may earn money from Shopify when you buy through product links. Sponsored results are labeled, and compensation never determines the Weekly Edit. How we make money

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Cut trees from your tractor seat

Drop the tree. Stay out of the fall zone.

A chainsaw puts you right under the tree. One bad fall and you get hurt. The DPH530 mounts on your tractor, so you cut from your seat, back from the trunk. You never stand where the tree can land. The tree comes down. You go home safe.

Hydraulics  Not neededHydraulic hoses  Not neededNotches and wedges  Not needed

Cuts trees up to 10 inches thick

Down in one clean pass

Trees in your fence line. Trees on your driveway. Trees where the barn should go. The DPH530 cuts trunks up to 10 inches thick in one pass. No notching. No wedges. No guessing. Back up, cut, and it's down.

Built-in push bar

Pushes falling trees away from you

The push bar is angled on purpose. It sends the falling tree and its limbs away from you and your tractor. The tree goes where you want it, not back at you. That's one more layer of safety on every cut.

Runs on 15 to 50HP tractors

No hydraulics needed

It runs straight off your 540 RPM PTO. No hoses to hook up. No hydraulic upgrade to buy. The heavy spinning blade does the cutting, not raw horsepower. So even a small tractor can run it.

3 edges on every carbide tooth

36 sharp edges before you buy new

The blade has 12 carbide tipped teeth. Carbide chips through wood fast and stays sharp. When one edge gets dull, turn the tooth to a fresh one. 12 teeth with 3 edges each gives you 36 sharp edges before you spend a dime.

3/4 inch AR400 steel blade

Built for years of work

The 30 inch blade is AR400 steel, 3/4 of an inch thick. AR400 is tough steel made to fight wear. It's built to cut tree after tree, year after year, not just for one weekend.

Cuts close to the ground

No tall stumps left behind

The DPH530 cuts low. No stumps sticking up. Nothing to trip on. Nothing to mow around. Nothing to hit with your tractor later.

Automatic slip clutch

Protects your tractor

If the blade binds or hits something hard, the slip clutch lets go. That saves your gearbox and your tractor's drive parts. One bad cut won't turn into a big repair bill.

Fits a CAT 1 3-point hitch

Quick hitch ready

It fits a standard Category 1 three-point hitch and works with a quick hitch. Back up, hook on, connect the PTO. You go from “I should deal with that tree” to done, fast.

6 free replacement teeth

In the box with every order

Every order ships with 6 spare teeth at no cost. Got a lot of trees? Keep going. No parts run. No waiting on a box.

Save on shipping and parts

$0

Freight bill. Shipping is free.

No freight charge on this saw. You also get 6 free teeth, and every tooth has 3 edges. That's a lot of cutting before you buy a single part.

Save time on every tree

1 pass

Per tree, up to 10 inches thick.

No notching. No wedges. No hoses to hook up. Back up, hook on, connect the PTO, and cut. Then move to the next tree.

Features and benefits

✓

Cuts from the tractor seat: You stay back from the trunk and out of the fall zone, not under the tree.

✓

10 inch cutting capacity: Drops real trees, not just brush, in one pass.

✓

Angled push bar: Guides falling trees and limbs away from you and your tractor.

✓

12 carbide tipped teeth: Chip through wood fast and stay sharp.

✓

3 edges per tooth: Turn to a fresh edge instead of buying new. 36 edges total.

✓

30 inch AR400 steel blade: 3/4 inch thick tough steel made to fight wear for years.

✓

Cuts close to the ground: No tall stumps to trip on, mow around, or hit later.

✓

Automatic slip clutch: Lets go on a bind to save your gearbox and driveline.

✓

PTO drive, no hydraulics: Nothing to plumb. Nothing to leak. Nothing extra to buy.

✓

Works on 15 to 50HP tractors: The spinning blade does the work, so small tractors can run it.

✓

CAT 1, quick hitch ready: Standard fit. Fast hookups.

✓

6 free replacement teeth: Spare teeth in the box, so you keep cutting.

✓

1 year warranty, parts and labor: Covers the part and the work to fix it.

✓

Free shipping: No freight bill. Tracking sent to your email.

Specifications

Spec Detail Model Baumalight DPH530 Type 3-point hitch tractor tree saw Hitch CAT 1 three-point hitch, quick hitch compatible Power source Tractor PTO, 540 RPM Hydraulics needed None Tractor HP range 15 to 50 HP engine Maximum PTO HP 40 HP Unit weight 704 lbs Hitch lift needed Must lift 704 lbs Blade diameter 30 inches Blade material AR400 steel, 3/4 inch thick Max cut diameter 10 inches Max tree height 10 ft (operator safety limit) Teeth 12 high speed carbide tipped, concave Cutting edges 3 per tooth, 36 total Cut height Close to the ground Push bar Built in, angled to guide trees and debris away Drive protection Automatic slip clutch Included 6 replacement teeth Warranty 1 year, parts and labor Shipping Free, 5 to 7 days, tracking by email

What you need to run it

A tractor with 15 to 50HP, a 540 RPM PTO, and a Category 1 three-point hitch that can lift 704 pounds. That's it. No hydraulics. It cuts trees up to 10 inches thick and 10 feet tall. If that's your tractor and your trees, the DPH530 fits and works.

Shipping

5–7 Days

Delivery in 5–7 Days with Tracking

Tracking sent to your email

Once your order ships, we send a tracking number to the email address on file. You'll know where your saw is the whole way.

If you have any questions regarding your order please call or email us.

Warranty

1 Year

One Year Manufacturer Warranty Included

Your warranty starts on the date of purchase.

What’s covered

Parts and labor. If a covered part fails, you're covered on the part and the work to fix it.

What’s not covered

Misuse, negligence, consequential damage, or expenses such as loss of profit.

If you have any questions regarding your warranty please call or email us.

Description supplied by Sullivan Equipment Co through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.

Current listing
$4,403.00
Shop at Sullivan Equipment Co