About this product
Baileigh BP-5060NC 50-Ton Hydraulic Press Brake with 61in Bending Capacity
The BP-5060NC is a 50-ton NC hydraulic press brake with a 61 inch bed. It shares the frame and bed length of the 33-ton machine below it in the range, but a 5 hp pump and heavier cylinders take full-width capacity from .078 inch up to .118 inch mild steel.
That extra thickness is the reason to choose it. At 61 inches by .118 inch you are into 1/8 inch plate across the whole bed, which covers bracketry, gussets, base plates and chassis work that a lighter brake can only manage in short sections. Throat depth is 7.87 inches, the housings sit 49.21 inches apart, and there is 11.81 inches from table to ram. The motorized back gauge runs on a ball screw with 23.62 inches of travel, with encoder-driven digital readouts on both ram depth and gauge position.
Three modes cover setup through production, all on foot pedal control, and it ships with hardened single-Vee tooling, front material rests and a safety curtain. Power is 220V 3-phase with a 5 hp main motor, a 1/2 hp back gauge motor and a 28 gallon reservoir. The machine weighs 6,160 lbs and moves by flatbed freight, so plan the offload before it arrives. One year warranty.
If .078 inch full width is enough for your work, the BP-3360NC gives the same 61 inch bed at 33 tons for less money. The full range is in press brakes.
Description supplied by Shape The Metal through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
