ANBO GR120HC-6 Grapple Rake - High Capacity - 6" Tines

📘 Overview

The ANBO GR120HC-6 is a heavy duty root grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 6 widths from 61" to 94" on 6-inch tine spacing. 6-inch spacing is the tightest full-size spacing in this series — it retains rock, root balls and soil-borne debris instead of sifting them back onto the ground, which makes the GR120HC-6 the choice for rock removal, root grubbing and mixed demolition debris. As a High Capacity unit the GR120HC-6 runs longer bottom tines and a larger closed volume than the standard GR120, so each pass carries more material without moving up a machine class. The choice you make on this listing is width — 61", 67", 74", 80", 87", 94" — and it drives attachment weight from 868 lb up to 1,211 lb, so pick the widest unit your loader can still lift full. Every ANBO high capacity grapple is built in Colville, Washington from American AR400F steel, ships with a mount fabricated for your own machine plus hoses and couplers, and carries a two-year attachment warranty with three years on the cylinders.

⚙ GR120HC-6 Key Features

• Rated to 120 horsepower — ANBO sizes each model to the machine, so the GR120HC-6 is matched to loaders and tractors up to 120 hp rather than sold by width alone.
• 6-inch tine spacing — retains rock, root balls and soil-borne debris instead of sifting them back onto the ground.
• 3/4" : 5/8" AR400F tines — outer to inner tine thickness on the GR120HC-6, in steel with a 150,000–180,000 PSI yield strength against 32,000 PSI for A36.
• 50" grapple opening — the jaw span of the GR120HC-6 when the clamshell is open.
• 2.5"x 8" or 3"x 8" hydraulic cylinders — fully welded, rear mounted and rated to 3,000 PSI, with a built-in pressure relief valve on the larger units to protect the machine's hydraulics.
• Clamshell design with a top grapple — the top bar closes over raked material, so the unit rakes, digs, grips and back-rakes without an attachment change.
• Greaseable, accessible pivot points — every pivot takes grease and can be reached without dismantling the rake.
• 2-wire R-16 hoses rated to 5,800 PSI — routed securely, with hose wrap offered to protect the supply lines.
• Two-piece mount, engineered position — most ANBO mounts are two-piece, keeping the center of the rake open for visibility; mount location and angle are set to work on both tractors and skid steers.
• Longer bottom tines and a wider opening — the High Capacity frame holds more material when closed than the standard GR120 at the same horsepower rating.
• Made in the USA from American steel — designed, fabricated and assembled in Colville, Washington.

🔑 Why Buyers Choose the GR120HC-6

• An 868 lb attachment on a 120 hp machine leaves lift capacity for the load — AR400F is five times stronger than grade 36, so ANBO reaches the required strength without the extra plate thickness that a mild-steel grapple needs. The 61" GR120HC-6 weighs 868 lb; the weight you do not spend on the attachment is weight you can still pick up.
• 6-inch spacing decides what stays in the load — on the GR120HC-6 it retains rock, root balls and soil-borne debris instead of sifting them back onto the ground, which is why this spacing is the one to pick for rock removal, root grubbing and mixed demolition debris.
• The top grapple lets you back-rake and carry in the same pass — material raked up is clamped and moved without swapping to a bucket, which removes a machine trip per pile.
• Greaseable pivots instead of sealed or welded ones — the wear points on the GR120HC-6 can be serviced on schedule, which is what decides whether a grapple lasts a season or a decade.
• Three years on the cylinders, one more than on the attachment — ANBO warrants the highest-wear hydraulic component for longer than it warrants the frame.
• More material per cycle at the same horsepower — the High Capacity frame carries a bigger closed volume than the standard GR120, so a forestry or production clearing job takes fewer trips without stepping up to a larger machine.

📊 ANBO GR120HC-6 Specifications — Heavy Duty Root Grapple

Specification Value Model ANBO GR120HC-6 Series High Capacity Grapple Rake Machine rating Up to 120 horsepower Tine spacing 6" Widths available 61" – 94" (6 widths) Tine size (outer : inner) 3/4" : 5/8" Tine material AR400F abrasion-resistant steel, 150,000–180,000 PSI yield Grapple opening 50" Hydraulic cylinders 2.5"x 8" or 3"x 8" Cylinder pressure rating 3,000 PSI Hydraulic hoses 2-wire R-16, 5,800 PSI rating Attachment weight 868 – 1,211 lb, by width Pivot points All greaseable Design Clamshell with top grapple and longer HC bottom tines Warranty 2-year attachment, 3-year cylinders Country of origin United States — Colville, Washington

🔄 GR120HC-6 Specifications by Width

The GR120HC-6 spans 61" to 94" and 868 lb to 1,211 lb across 6 part numbers. Every one shares the same 6" tine spacing, the same 50" opening, and cylinder size steps up with width.

Part number Width Attachment weight Cylinders GR120HC-6-61 61" 868 lb 2.5"x 8" GR120HC-6-67 67" 938 lb 2.5"x 8" GR120HC-6-74 74" 1,010 lb 3"x 8" GR120HC-6-80 80" 1,076 lb 3"x 8" GR120HC-6-87 87" 1,141 lb 3"x 8" GR120HC-6-94 94" 1,211 lb 3"x 8"

📋 Choosing Your GR120HC-6 Width

This listing covers the GR120HC-6 — tine spacing is fixed at 6" Tines across every part number on the page. The width option is the selection you make at checkout:

• 61" — part number GR120HC-6-61, 868 lb attachment weight
• 67" — part number GR120HC-6-67, 938 lb attachment weight
• 74" — part number GR120HC-6-74, 1,010 lb attachment weight
• 80" — part number GR120HC-6-80, 1,076 lb attachment weight
• 87" — part number GR120HC-6-87, 1,141 lb attachment weight
• 94" — part number GR120HC-6-94, 1,211 lb attachment weight

A wider GR120HC-6 covers more ground per pass but adds 343 lb between the narrowest and widest unit. Match the width to what your loader can lift full, not to the widest unit offered.

🔗 What Is the ANBO GR120HC-6 Used For?

ANBO builds the High Capacity Grapple Rake line for rock removal, root grubbing and mixed demolition debris. On the GR120HC-6 specifically, the jobs it is bought for are:

• High-volume brush and slash piling
• Forestry cleanup
• Carrying larger loads per pass
• Stump and root handling
• Production land clearing

The GR120HC-6 ships complete and ready to run — the grapple, the mount built for your machine, hoses and couplers.

Buyers shop this class of attachment under several names. Skid steer rock rake and clamshell grapple both describe what the GR120HC-6 is — a clamshell rake that grips. If your search started with skid steer grapple rake, mini skid steer grapple or tractor root rake, the GR120HC-6 is the 120-horsepower unit in that family.

🚜 Which Machines Fit the ANBO GR120HC-6?

The ANBO GR120HC-6 is built to order with a mount made for your specific machine. It is not a fixed-interface attachment: ANBO fabricates the mount to the loader, tractor or skid steer you name when you order, so fitment is confirmed at build time rather than assumed from a standard.

Fitment factor ANBO GR120HC-6 Machine horsepower Up to 120 hp — this is the primary fitment limit on the GR120HC-6 Machine types Tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower Grapple opening 50" — the largest single piece the GR120HC-6 will close on Mount Custom-built to your machine. Universal skid steer quick attach and John Deere are the common options; ANBO builds most other mounts as well Mount construction Two-piece on most units, which keeps the center of the rake open for visibility. Build-backs reduce lift capacity and are only used where a machine requires one Hydraulics required One double-acting auxiliary hydraulic circuit to open and close the grapple. Cylinders are rated to 3,000 PSI Supplied with Mount, hoses and couplers

Horsepower is the deciding number, not width: ANBO names each model for the machine size it is built for, and running a 120-hp-rated grapple behind a bigger machine is what bends attachments. You do not need to check with us first: the order page asks for your machine make and model, we build the mount to it, and we verify fitment before the unit ships.

❓ ANBO GR120HC-6 Questions, Answered