About this product
📘 Overview
The ANBO GR120-6 is a root grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 6 widths from 61" to 94" on 6-inch tine spacing. 6-inch spacing is the tightest full-size spacing in this series — it retains rock, root balls and soil-borne debris instead of sifting them back onto the ground, which makes the GR120-6 the choice for rock removal, root grubbing and mixed demolition debris. The GR120-6 uses short root-rake tines in 3/4" outer and 5/8" inner AR400F steel, with a clamshell top grapple that closes over raked material so a load can be back-raked, gripped and carried in one pass. The choice you make on this listing is width — 61", 67", 74", 80", 87", 94" — and it drives attachment weight from 776 lb up to 1,085 lb, so pick the widest unit your loader can still lift full. Every ANBO grapple is built in Colville, Washington from American AR400F steel, ships with a mount fabricated for your own machine plus hoses and couplers, and carries a two-year attachment warranty with three years on the cylinders.
⚙ GR120-6 Key Features
- Rated to 120 horsepower — ANBO sizes each model to the machine, so the GR120-6 is matched to loaders and tractors up to 120 hp rather than sold by width alone.
- 6-inch tine spacing — retains rock, root balls and soil-borne debris instead of sifting them back onto the ground.
- 3/4" : 5/8" AR400F tines — outer to inner tine thickness on the GR120-6, in steel with a 150,000–180,000 PSI yield strength against 32,000 PSI for A36.
- 48" grapple opening — the jaw span of the GR120-6 when the clamshell is open.
- 2.5"x 8" or 3"x 8" hydraulic cylinders — fully welded, rear mounted and rated to 3,000 PSI, with a built-in pressure relief valve on the larger units to protect the machine's hydraulics.
- Clamshell design with a top grapple — the top bar closes over raked material, so the unit rakes, digs, grips and back-rakes without an attachment change.
- Greaseable, accessible pivot points — every pivot takes grease and can be reached without dismantling the rake.
- 2-wire R-16 hoses rated to 5,800 PSI — routed securely, with hose wrap offered to protect the supply lines.
- Two-piece mount, engineered position — most ANBO mounts are two-piece, keeping the center of the rake open for visibility; mount location and angle are set to work on both tractors and skid steers.
- Made in the USA from American steel — designed, fabricated and assembled in Colville, Washington.
🔑 Why Buyers Choose the GR120-6
- A 776 lb attachment on a 120 hp machine leaves lift capacity for the load — AR400F is five times stronger than grade 36, so ANBO reaches the required strength without the extra plate thickness that a mild-steel grapple needs. The 61" GR120-6 weighs 776 lb; the weight you do not spend on the attachment is weight you can still pick up.
- 6-inch spacing decides what stays in the load — on the GR120-6 it retains rock, root balls and soil-borne debris instead of sifting them back onto the ground, which is why this spacing is the one to pick for rock removal, root grubbing and mixed demolition debris.
- The top grapple lets you back-rake and carry in the same pass — material raked up is clamped and moved without swapping to a bucket, which removes a machine trip per pile.
- Greaseable pivots instead of sealed or welded ones — the wear points on the GR120-6 can be serviced on schedule, which is what decides whether a grapple lasts a season or a decade.
- Three years on the cylinders, one more than on the attachment — ANBO warrants the highest-wear hydraulic component for longer than it warrants the frame.
📊 ANBO GR120-6 Specifications — Root Grapple
Specification Value Model ANBO GR120-6 Series Grapple Rake Machine rating Up to 120 horsepower Tine spacing 6" Widths available 61" – 94" (6 widths) Tine size (outer : inner) 3/4" : 5/8" Tine material AR400F abrasion-resistant steel, 150,000–180,000 PSI yield Grapple opening 48" Hydraulic cylinders 2.5"x 8" or 3"x 8" Cylinder pressure rating 3,000 PSI Hydraulic hoses 2-wire R-16, 5,800 PSI rating Attachment weight 776 – 1,085 lb, by width Pivot points All greaseable Design Clamshell with top grapple Warranty 2-year attachment, 3-year cylinders Country of origin United States — Colville, Washington🔄 GR120-6 Specifications by Width
The GR120-6 spans 61" to 94" and 776 lb to 1,085 lb across 6 part numbers. Every one shares the same 6" tine spacing, the same 48" opening, and cylinder size steps up with width.
Part number Width Attachment weight Cylinders GR120-6-61 61" 776 lb 2.5"x 8" GR120-6-67 67" 837 lb 2.5"x 8" GR120-6-74 74" 912 lb 3"x 8" GR120-6-80 80" 968 lb 3"x 8" GR120-6-87 87" 1,024 lb 3"x 8" GR120-6-94 94" 1,085 lb 3"x 8"📋 Choosing Your GR120-6 Width
This listing covers the GR120-6 — tine spacing is fixed at 6" Tines across every part number on the page. The width option is the selection you make at checkout:
- 61" — part number GR120-6-61, 776 lb attachment weight
- 67" — part number GR120-6-67, 837 lb attachment weight
- 74" — part number GR120-6-74, 912 lb attachment weight
- 80" — part number GR120-6-80, 968 lb attachment weight
- 87" — part number GR120-6-87, 1,024 lb attachment weight
- 94" — part number GR120-6-94, 1,085 lb attachment weight
A wider GR120-6 covers more ground per pass but adds 309 lb between the narrowest and widest unit. Match the width to what your loader can lift full, not to the widest unit offered.
🔗 What Is the ANBO GR120-6 Used For?
ANBO builds the Grapple Rake line for rock removal, root grubbing and mixed demolition debris. On the GR120-6 specifically, the jobs it is bought for are:
- Removing rocks from job-site soil
- Collecting brush, logs and stumps
- Transporting firewood
- Root and debris grubbing
- Farm, commercial and residential land clearing
The GR120-6 ships complete and ready to run — the grapple, the mount built for your machine, hoses and couplers.
Buyers shop this class of attachment under several names. Compact tractor grapple and root rake for skid steer both describe what the GR120-6 is — a clamshell rake that grips. If your search started with heavy duty root grapple, ANBO grapple or root grapple for tractor, the GR120-6 is the 120-horsepower unit in that family.
🚜 Which Machines Fit the ANBO GR120-6?
The ANBO GR120-6 is built to order with a mount made for your specific machine. It is not a fixed-interface attachment: ANBO fabricates the mount to the loader, tractor or skid steer you name when you order, so fitment is confirmed at build time rather than assumed from a standard.
Fitment factor ANBO GR120-6 Machine horsepower Up to 120 hp — this is the primary fitment limit on the GR120-6 Machine types Tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower Grapple opening 48" — the largest single piece the GR120-6 will close on Mount Custom-built to your machine. Universal skid steer quick attach and John Deere are the common options; ANBO builds most other mounts as well Mount construction Two-piece on most units, which keeps the center of the rake open for visibility. Build-backs reduce lift capacity and are only used where a machine requires one Hydraulics required One double-acting auxiliary hydraulic circuit to open and close the grapple. Cylinders are rated to 3,000 PSI Supplied with Mount, hoses and couplersHorsepower is the deciding number, not width: ANBO names each model for the machine size it is built for, and running a 120-hp-rated grapple behind a bigger machine is what bends attachments. You do not need to check with us first: the order page asks for your machine make and model, we build the mount to it, and we verify fitment before the unit ships.
❓ ANBO GR120-6 Questions, Answered
What size machine does the ANBO GR120-6 fit?
The ANBO GR120-6 is rated for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower. ANBO names each model for the machine size it is built for, so a 120-hp rating is a ceiling rather than a suggestion: putting a larger machine behind the GR120-6 is the most common way a grapple gets bent.
Which width of the GR120-6 should I order?
The GR120-6 comes in 6 widths from 61" to 94". Attachment weight runs from 776 lb at 61" to 1,085 lb at 94", so the limit is what your loader can still lift once the grapple is full. A wider unit clears more ground per pass; a narrower one leaves more of your rated capacity for the load.
Why does the GR120-6 use 6-inch tine spacing?
6-inch spacing is the tightest full-size spacing. On the GR120-6 it retains rock, root balls and soil-borne debris instead of sifting them back onto the ground. That is what makes this the right unit for rock removal, root grubbing and mixed demolition debris — spacing decides what stays in the load and what falls back on the ground.
What hydraulics does the ANBO GR120-6 need?
The GR120-6 needs one double-acting auxiliary hydraulic circuit to open and close the clamshell. The cylinders are fully welded, rear mounted and rated to 3,000 PSI, and the hoses are 2-wire R-16 rated to 5,800 PSI. The larger ANBO units include a built-in pressure relief valve to protect your machine's hydraulic system.
Does the GR120-6 come with a mount for my machine?
Yes. ANBO builds the mount for the specific machine you name at order time and the GR120-6 ships complete with mount, hoses and couplers. Most ANBO mounts are two-piece, which keeps the center of the rake open so you can see the load. Tell us what you are running when you order and the mount is built to it.
What is AR400F steel, and why does ANBO use it?
AR400F is an abrasion-resistant alloy with a yield strength of 150,000–180,000 PSI against 32,000 PSI for A36 mild steel — roughly five times stronger. The F is for formability: it is less brittle than standard AR400, so it bends rather than cracking under shock load. Because the steel is stronger, the GR120-6 does not need the extra plate thickness a mild-steel grapple uses, and the weight saved stays available as lift capacity.
What warranty comes with the ANBO GR120-6?
ANBO provides a two-year manufacturer defect warranty on the attachment from the date of delivery to the original purchaser, and three years on the cylinders. The warranty does not cover use beyond rated capacity, misuse, unauthorized modification, or normal wear on ground-engaging tines. For a warranty question on a GR120-6 bought from us, email support@eskidsteer.com.
What servicing does the GR120-6 need?
Grease every pivot point on schedule — ANBO makes all pivots greaseable and accessible on the GR120-6 so this can be done without dismantling the rake. Check the hose routing and the hose wrap for abrasion, and inspect the tines for wear. Tines are ground-engaging parts and wear is not a warranty item.
Why do some GR120-6 widths use larger cylinders?
ANBO sizes the cylinder to the unit width on the GR120-6. The 61", 67" widths use 2.5"x 8" cylinders and the 74", 80", 87", 94" widths use 3"x 8", because a wider grapple needs more closing force across the jaw. Both are fully welded, rear mounted and rated to 3,000 PSI.
Should I get the 6" GR120 or a wider tine spacing?
eskidsteer.com stocks the GR120 in 6" as well as 8". The 6" GR120-6 retains rock, root balls and soil-borne debris instead of sifting them back onto the ground. A wider spacing sheds more soil and fines, which is what you want when you are moving timber and brush rather than picking rock. Spacing does not change the machine rating — every GR120 is built for machines up to 120 horsepower.
How big a piece can the GR120-6 pick up?
The GR120-6 has a 48" grapple opening, which is the largest single piece the clamshell will close on. Anything larger has to be cut or handled in the rake rather than gripped.
Is compact tractor grapple the same thing as the GR120-6 grapple rake?
Compact tractor grapple and root rake for skid steer are two names for the class of attachment the GR120-6 belongs to — a loader-mounted clamshell that rakes and grips. ANBO calls the GR120-6 a grapple rake because the lower tines rake and dig while the top grapple closes over the load. If your search started with heavy duty root grapple or ANBO grapple, the GR120-6 is the 120-horsepower unit in that family.
How is the ANBO GR120-6 shipped and how much is freight?
The GR120-6 ships by LTL freight. Shipping is calculated at checkout — add the width you want to your cart, enter your delivery address, and the shipping charge is shown before you complete the order. Lift gate service is available for residential deliveries and can be selected at checkout.
How do I order the ANBO GR120-6?
Add the GR120-6 width you need to your cart and check out online — that is the whole process. The order page asks for your machine make and model; we build the mount to that machine and verify fitment before it ships, so there is no need to call ahead or wait on a quote. If you would rather ask something first, use the chat button on any eskidsteer.com page or email support@eskidsteer.com.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
